基于EMD的弹丸激波信号处理方法研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
实验中获取的弹丸激波信号因高频噪声的影响而几乎被淹波,预处理方法的研究对于有用信号的识别非常重要。文中通过分析弹丸激波信号的特点,利用经验模态分解对弹丸激波信号进行了特征提取与选择,将本征模态函数分量及其瞬时频率作为特征,获得了较理想的N波信号处理结果。实验结果表明,该算法不仅能有效提取高噪条件下弹丸激波信号特征,而且易于硬件实现。
The shockwave signals obtained in experiment were nearly submerged in the high-frequent noise,so it is very important to develop the preprocessing method for identifying the useful signals.By analysis of the properties of shockwave signal,the empirical mode decomposition was adopted to extract and select its characteristics.Intrinsic mode function components and instantaneous frequency were collected to obtain better processed results.The results prove that the method could not only effectively extract the characteristics of the shockwave signal in high noise,but also be apt to implement with the hardware.
引文
[1]字正华,石庚辰.超音速飞行体基波信号的主成分分析和K-均值聚类[J].探测与控制学报,2004,26(2):17-18.
    [2]张飞猛,焦军,战延谋.火炮对空射击声靶的信号检测特性和传感器性能分析[J].传感技术学报,2004,17(3):501-504.
    [3]Huang N E.The empirical mode decompositionand the Hilbert spectrum for nonlinear and non-stationary time series analysis[J].Proc Roy SocLondon A,1998,454(4):903-995.
    [4]武安绪,林向东,穆会泳,等.EMD新技术在数字波形预处理中的初步应用[J].华南地震,2006,26(1):133-134.
    [5]孟宗,戴桂平,刘彬.基于EMD时频分析方法的性能研究[J].传感技术学报,2006,19(4):1029-1031.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心