基于电涡流传感器的轴瓦平行度/高出度自动检测系统
|
摘要
针对轴瓦平行度及高出度自动检测的强烈要求,应用电涡流传感器获取基础数据,以PLC为现场控制模块,采用16/32位嵌入式微处理器和μc/osΠ-实时操作系统作为中心控制单元,实现了对轴瓦平行度/高出度实时,在线高精度测量,并利用专家系统对产品实时跟踪,开发出了高性价比的轴瓦平行度/高出度自动检测系统。
Aiming at the heavy request of automatically checking the parallelism and height of bearing bush,a bearing bush measurement system of high ratio performance & price,which is based on 16/32 bits embedded single-chip microcontroller and μc/os-Π real operating system,was developed.The system applies eddy current sensor to obtain base data and PLC as the living control module.The system can measure height and parallelism with real time more efficiently and accurately.The export system is also applied to track the result.
Aiming at the heavy request of automatically checking the parallelism and height of bearing bush,a bearing bush measurement system of high ratio performance & price,which is based on 16/32 bits embedded single-chip microcontroller and μc/os-Π real operating system,was developed.The system applies eddy current sensor to obtain base data and PLC as the living control module.The system can measure height and parallelism with real time more efficiently and accurately.The export system is also applied to track the result.
引文
1张建民.机电一体化系统设计.北京:北京理工大学出版社,2004
2张毅,张宝芬.自动检测技术及仪表控制系统.北京:化学工业出版社,
3周振安,范良龙,等.数据采集系统的设计与实践.北京,地震出版社,2005
4张玉柱,杨克己,等,轴瓦壁厚/平行读检测系统.制造技术与机床,2004;(2):99—101
5张乐山.薄壁轴瓦对口面平行度检测方法的探讨.机车车辆工艺,1998;(5):38—40
2张毅,张宝芬.自动检测技术及仪表控制系统.北京:化学工业出版社,
3周振安,范良龙,等.数据采集系统的设计与实践.北京,地震出版社,2005
4张玉柱,杨克己,等,轴瓦壁厚/平行读检测系统.制造技术与机床,2004;(2):99—101
5张乐山.薄壁轴瓦对口面平行度检测方法的探讨.机车车辆工艺,1998;(5):38—40
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心