大型构件双机三点吊最佳绳系方案研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
将绳系稳态方程作为整个系统的约束条件,将钢丝绳的长度作为系统内的变量,并且采用遗传算法对整个系统进行了优化,从而对其进行了修正。最后用此方法对双机三点吊进行了数值模拟,取得了较好的效果,计算结果还进一步验证了吊装过程中最大弯矩的出现不一定是水平位置。
In this paper,the equilibrium equation of rope system is used as constraint condition,the length of steel rope is regarded as a system variable and the genetic algorithm is applied to optimize the whole system.Through these measures,the above faultinesses are rectified.At last,"Three points suspension with two cranes" is successfully simulated by the rectified method and the results validate that the maximum not always occur just at the horizontal angle in the hoisting process.
引文
[1]黎谷,等.建筑工程手册(第三卷)[M].北京:地震出版社,1993.
    [2]刘树堂,等.采用“双机三点吊”吊装钢筋混凝土长柱的最优方案的研究[J].东北电力学院学报,2000,20(3):32-37.
    [3]刘树堂,等.大型钢筋混凝土长柱双机四点吊的最佳绳系与最佳吊点的研究[J].电力建设,2000,(7):30-36.
    [4]刘树堂,等.大型钢筋混凝土柱整体吊装“双机五点吊”绳系方案研究[J].天津大学学报,2001,34(2):268-272.
    [5]陈祥都.约束绳系力学[M].武汉:华中理工大学出版社,1992.
    [6]周明,等.遗传算法原理及应用[M].北京:国防工业出版社.1999.
    [7]付兵,等.大型钢筋混凝土长柱吊装的最优方案研究[J].工程力学,2005,22(1):195-199.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心