基于地层轮廓的三维重构的设计和实现

英文篇名：DESIGN AND REALIZATION OF 3D RECONSTRUCTION BASED ON CONTOURS OF STRATA
中文刊名：计算机应用与软件
英文刊名：Computer Applications and Software
作者：谭夏梅 ; 梁利东
英文作者：Tan Xiamei1 ; 2 Liang Lidong21(Faculty of Electromechanical Engineering ; Guangdong University of Technology ; Gunagzhou 510643 ; Guangdong ; China)2(School of Automative Engineering ; South China University of Technology ; Guangzhou 510641 ; Guangdong ; China)
中文关键词：三维重构 ; 地层 ; 三角剖分 ; 轮廓线 ; B-B曲面
英文关键词：3D reconstruction Stratum Triangulation Contour Bernstein-Bezier surface
出版日期：2009-03-15
机构：广东工业大学机电工程学院;华南理工大学汽车工程学院;
年：2009
期：03
出版单位：计算机应用与软件

摘要

在进行海底地质地层调查勘探时,通常根据测量仪器采集的数据生成地层断面轮廓线,按照这些连续的轮廓线的分布特征及其灰底不同来粗略地分辨地层的性质。然而这些单一的剖面轮廓还不足以直观地反映该地域整体地层的三维形状分布信息。根据地质地层分布的特性,通过对相邻断层轮廓线点集的匹配和三角剖分算法来进行地层分布的三维重构,并利用基于三角域的Bernstein-Bezier曲面构造三次光滑曲面,从而模拟三维的地层分布效果图。
The continuous contours of strata section normally come from datum collected by kinds of measure machines.They usually describe some stratum properties roughly according their distribution characters and differences of grey base on surveying the benthal geological status.But these single section contours can not sufficiently reflect intuitional 3D shape distribution information of the whole stratum field be measured.In the article it created 3D reconstruction of strata distribution according to the characteristics of geological strata distribution and through control vertex matching theory of contour set on adjacent sections and triangulation algorithm for contours,and drew up smooth cubic surface of stratum with Bernstein-Bezier surface method to simulate 3D stratum distribution effect drawings.

引文

[1]魏恒源.浅地层剖面仪在水域工程勘察中的应用[J].华南地震,1996,16(4):73-79.
    [2]Keppel E.Approximating complex surface by triangulation of contours lines[J].IBMJ Res Develop,1975(19):2-11.
    [3]Fuchs H,Keddem Z M,Uselto S P.Optimal Surface Reconstruction from Planar contours[J].Communication of the ACM,1977,20(10):693-702.
    [4]石教英,蔡文立.科学计算可视化算法与系统[M].北京:科学出社,1996.
    [5]崔汉国,胡瑞安,金端峰,等.三维任意区域中点集的三角剖分算法[J].计算机辅助设计与图形学学报,1995,7(2):103-108.
    [6]孙家广,杨长贵.计算机图形学[M].第二版.北京:清华大学出版社,1995.
    [7]周焰.平面轮廓线之间的分块三角划分算法[J].系统工程与电子技术,2003,25(8):1003-1006。
    [8]朱心雄,等.自由曲线曲面造型技术[M].北京:科学出版社,2000.
    [9]吴斌,段海波,薛凤武,译.OpenGL编程权威指南[M].第三版.中国电力出版社,2001.