VN微合金化HRB400E抗震钢筋的研制
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用VN微合金化工艺进行HRB400E抗震钢筋的试制,通过对钢筋化学成分、冶炼工艺和轧制工艺的合理设计,成功试制出HRB400E抗震钢筋。对抗震钢筋的力学性能、应变时效性能、金相组织进行研究,结果表明试制的抗震钢筋具有较高的强度和塑性,以及良好的应变时效性能,金相组织正常,能满足GB 1499.2-2007抗震钢筋的要求。
This paper introduces the rial production of antiseismic ribbed bar of VN-microalloying HRB400E.The steel was manufactured successfully by properly designing its chemical composition,smelting process and rolling process.The tensile strength,strain-aged property and microstructure of HRB400E were researched.Results showed that the steel had high strength and high ductility,good strain-aged property,and normal microstructure.It could satisfy with requirements of antiseismic ribbed bar in GB 1499.2-2007.
引文
[1]龚士弘,盛光敏.地震区建筑用钢的塑性对建筑物抗震性能的影响[J].工程抗震,2004,3:41-47.
    [2]樊晓雷,王学忠.400、500MPa级钢筋的抗震性能研究[J].金属材料与冶金工程,2009,2(37):30-34.
    [3]郭湛,完卫国,孙维,等.功能性建筑用钢筋的研究现状及发展趋势[J].安徽冶金科技职业学院学报,2010,1(20):3-6.
    [4]秦斌,盛光敏,龚士弘.HRB400抗震钢筋的综合性能[J].钢铁研究学报,2006,5(18):33-36.
    [5]陈伟,苏鹤洲,李金柱.钒氮微合金化HRB400抗震钢筋的研制[J].云南冶金,2007,5(36):36-39.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心