基于MAX1452硅压力传感器温度补偿系统的设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对硅压阻式传感器存在的温度漂移误差和输出信号的非线性提出了利用MAX1452温度调理芯片进行补偿的方案。描述了传感器温度补偿系统的整体构架,着重阐述了MAX1452的补偿原理以及对传感器的补偿过程。测试结果表明传感器经过补偿以后,在-40~80℃的温度范围内输出的信号与压力成较好的线性关系,测量的误差小于0.8%。
A plan was introduced for compensating the temperature errors and the no-liner of the silicon pressure sensor by using the MAX1452 processor.The frame of this compensating system was described.This paper gives the principles of the temperature compensation and executive processes of pre-calibration and compensation.The experimental results show that the relation between the pressure and the output of the pressure sensor is linear in the range of-40℃~80℃,the measurement error is smaller than 0.8%.
引文
[1]王世清,姜彤,侯占民.单晶硅压力传感器温度漂移的补偿方法.传感器与微系统,2006,25(7),34-35.
    [2]Gustafsson MG,Stepinski T.Studyes of split spectrum processing,op-tional detection,and maximum likelihood amplitude estimation using asimple cluttermode.Ultrasonics,1997,35(1):31-52.
    [3]Drai R,Khelil M,Benchaala A.Time frequency and wavelet transformapplied to selected problems in ultrasonic nde.NDTand E Internaion-al,2002,35(8):567.
    [4]王美玲.压阻传感器信号调理的解决方案.仪表技术与传感器.2002(6):38-40.
    [5]赵妍,刘志珍.基于MAX1452的压力传感器温度补偿.电气应用.2006,25(4):136-139.
    [6]张巍,景同,王丕涛.基于BP网络的高精度信号调理系统的研制.微计算机信息,2008,24(4),271-272.
    [7]陈力刚,付建华,白磊等.利用MAX1452提高水位传感器的信号质量.山西地震.2008(7),14-17.
    [8]夏勇,杨建华,杨.多路硅压阻式压力传感器温度补偿系统的设计与实现.测控技术.2006,25(1),10-12.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心