摩擦摆隔震技术研究和应用的回顾与前瞻(Ⅰ)——摩擦摆隔震支座的类型与性能
|
摘要
摩擦摆隔震支座是一种具有广泛应用前景的隔震支座,本文回顾总结了20多年来国内外摩擦摆隔震支座的开发和研究进展。依据几何构造的异同将现有的各摩擦摆隔震支座分为曲面式、沟槽式、曲面沟槽混合式摩擦摆隔震支座等3类,分别介绍了各类摩擦摆隔震支座的基本构造、隔震原理、消能机制与回复机制、性能研究和分析模型等。
Friction pendulum bearing is an isolation bearing which has extensive application prospect.In this paper,advances in development and research in the fields of friction pendulum bearings at home and abroad for more than two decades are generally reviewed.Based on the geometric construction,all kinds of existing friction pendulum bearings are divided into three kinds,there’re surface type and trench type as well as the surface-trench mixed type respectively.The basic structures,isolation principle,energy mechanisms and recovery mechanisms,performance study and analysis models of each kind of friction pendulum bearings are introduced.
Friction pendulum bearing is an isolation bearing which has extensive application prospect.In this paper,advances in development and research in the fields of friction pendulum bearings at home and abroad for more than two decades are generally reviewed.Based on the geometric construction,all kinds of existing friction pendulum bearings are divided into three kinds,there’re surface type and trench type as well as the surface-trench mixed type respectively.The basic structures,isolation principle,energy mechanisms and recovery mechanisms,performance study and analysis models of each kind of friction pendulum bearings are introduced.
引文
[1]Zayas V,Low S and Mahin S.The FPS earthquakeresisting system[R].Technical Report UCB/EERC-87/01,University of California at Berkeley,1987
[2]Zayas V,Low S,Bozzo L and Mahin S.Feasibility andPerformance Studies on Improving The EarthquakeResistance of New and Existing Buildings Using TheFriction Pendulum System[R].Technical Report UBC/EERC-89/09,University of California at Berkeley,1989
[3]Zayas V,Low S and Mahin S.A simple pendulumtechnique for achieving seismic isolation[J].Earthquake Spectra,1990,6
[4]Mokha A,Constantinou M C and Reinhorn A M.Teflonbearings in aseismic base isolation.Experimental studiesand mathematical modeling[R].Report No.NCEER-88-0038,State Univ.of New York,Buffalo,N.Y,1988
[5]Su L,Ahmadi G and Tadjbakhsh I.A comparative studyof performance of various base isolation systems,part I:Shear beam structures[J].Earthquake Engineering andStructural Dynamics.,1989,18(1)
[6]Constantinou M C,Mokha A and Reinhorn A M.Teflonbearings in base isolation II:Modeling[J].J.Structural Engineering,ASCE,1990,116(2)
[7]陈永祁,杨凤利,刘林.摩擦摆隔震桥梁的设计及应用[J].工业建筑,2009,增刊Chen Yong-qi,Yang Feng-li,Liu Lin.Design andApplication of Friction Pendulum Bearing for SeismicIsolated Bridges[J].Industrial Construction,supplementary issue,2009(in Chinese)
[8]Victor Zayas,Theodore Piepenbrock,Tahmeed Al-Hussaini.Summary of testing of the friction pendulumseismic isolation system 1986～1993[A].Preprint:Proc.,“ATC-17-1,Seminar on Seismic Isolation,Passive Energy Dissipation,and Active Control”,Applied Technology Council,Redwood City,CA94065,March 1993
[9]Zayas V A,Contantinou M C,Tsopelas P,Kartoum A.Testing of Friction Pendulum Seismic Isolation Bearingsfor Bridges[A].The 4th World Congress On Joints AndBearings[C],September 1996,Sacramento,California
[10]Constantinou M C,Caccese J,Harris H G.Frictionalcharacteristics of teflon-steel interfaces under dynamicconditions[J].Earthquake Engineering and StructuralDynamics,1987,15(6)
[11]Mokha A S,Constantinou M C and Reinhorn A M.Teflon bearing in base isolation.I,Testing[J].J.Structural Engineering,ASCE,1990,Vol.116
[12]Mokha A,Constantinou M and Reinhorn A.Experimental study of friction-pendulum isolation system[J].J.Structural Engineering,ASCE,1991,117
[13]Mokha A,Constantinou M and Reinhorn A.Verificationof friction model of Teflon bearings under Triaxial load[J].J.Structural Engineering,ASCE,1993,119
[14]Mokha A S,Constantinou M C and Reinhorn A M.Further results on frictional properties of Teflon bearings[J].J.Structural Engineering,1991,117(2)
[15]Constantinou M,Tsopelas P,Kasalanati A,Wolf E.Property modification factors for seismic isolationbearings[R].Technical Report MCEER-99-0012,StateUniv.of New York,Buffalo,NY,1999
[16]Kasalanati A,Constantinou M.Experimental study ofbridge elastomeric and other isolation and energydissipation systems with emphasis on uplift preventionand high velocity near source seismic excitation[R].Technical Report MCEER-99-0004,State Univ.of NewYork,Buffalo,NY,1999
[17]Seible F.Uni-directional Cylindrical FP bearings forretrofit of West Span of San Francisco-Oakland BayBridge[R].UCSD Test Report,2001
[18]Seible F.FP bearing for Bolu Viaduct Project forgovernment of Turkey[R].UCSD Test Report 2001
[19]Seible F.FP bearings for retrofit of I-40 project[R].UCSD Test Report,Tennessee DOT,2002
[20]Daniel Fenz.Frictional properties of non-metallicmaterials for use in sliding bearings:an experimentalstudy[E].http://mceer.buffalo.edu/publications/resaccom/02-SP09/pdfs_screen/19_Fenz.pdf
[21]Ryuichi Kousaka,Hironori Hamazaki,Nobuo Murota,and Mineo Takayama.Experimental Study on Durabilityof Sliding Bearings under Long Duration DynamicLoading[A].Proc.of the 14th WCEE[C],Oct.,12-17,2008,Beijing,China
[22]Hyakuda T,Saitok K,Matsushita T,et al.Thestructural design and earthquake observation of a seismicisolated building using friction pendulum system[A].Proc.of The 7th International Seminar on SeismicIsolation,Passive Energy Dissipation and Active Controlof Vibrations of Structures[C],Assisi,Italy,October 2～5,2001
[23]郭品宏.球面摩擦型隔震器之组件试验[D].台北:国立台北科技大学硕士学位论文,2001Pin Hung-Kuo.Component Test of Spherical SlidingIsolators[D].Taipei:National Taipei University ofTechnology,2001(in China)
[24]江子政.复摆隔震器于防震工程之应用[D].台中:逢甲大学博士学位论文,2004Tsu-Cheng Chiang.Applications of Multiple FrictionPendulum System in Seismic Engineering[D].Taizhong:Feng Chia University,2004(in Chinese)
[25]曾旭玟.高分子材料于结构隔震技术之应用[D].高雄.国立高雄第一科技大学硕士学位论文,2004Shiu Wen Tzeng.Application of Polymer Materials forBase Isolation of Seismic Structures[D].Kaohsiung:National Kaohsiung First University of Science andTechnology,2004(in Chinese)
[26]Wenying Hu.Analysis Effectiveness of Bridges withPartial Isolation[D].Utah State University Logan,Utah,2008
[27]SAP 2000.Computers and Structures Inc.:Berkeley,CA,1999[E].http://www.csiberkeley.com/
[28]Tsopelas P C,Constantinou M C,Reinhorn A M.3D-BASIS-ME:computer program for nonlinear dynamicanalysis of seismically isolated single and multiplestructures and liquid storage tanks[R].Report NCEER-94-0010,State Univ.of New York,Buffalo,1994
[29]Eric Abrahamson,Steve Mitchell.Seismic responsemodification device elements for bridge structuresdevelopment and verification[J].Computers andStructures,2003,81
[30]王建强,管品武,李大望.摩擦摆基础隔震结构双向地震反应分析[J].世界地震工程,2005,21(3)Wang Jian-qiang,Guan Pin-wu,Li Da-wang.Analysisof seismic response of base-isolated structures withfriction pendulum system under bilateral ground motions[J].World Earthquake Engineering,2005,21(3)(inChinese)
[31]王建强,丁永刚,李大望.摩擦摆支座恢复力模型研究[J].四川建筑科学研究,2007,33(3)Wang Jian-qiang,Ding Yong-gang,Li Da-wang.Studyon restoring force model of friction pendulum isolator[J].Sichuan Building Science,2007,33(3)(inChinese)
[32]Jianqiang Wang,Dawang Li.Analysis on seismicresponse of base-isolated structures with frictionpendulum system under bilateral ground motions[A].Proc.of the 11th International Conference onEngineering,Science,Construction,and Operations inChallenging Environments[C],2008 Long Beach,CA
[33]焦驰宇,胡世德,管仲国.FPS抗震支座分析模型的比较研究[J].振动与冲击,2007,26(10)Jiao Chi-yu,Hu Shi-de,Guan Zhong-gu.Comparisonstudy on analysis models of FPS seismic isolation support[J].J.Vibration and Shock,2007,26(10)(inChinese)
[34]JoséL Almazán,Juan C De la Llera.Analytical modelof structures with frictional pendulum isolators[J].Earthquake Engineering and Structural Dynamics,2002,31(2)
[35]J Almazán,J De la Llera and J Inaudi.Modelingaspects of structures isolated with the friction pendulumsystem[J].Earthquake Engineering and StructuralDynamics,1998,27
[36]J Almazán and J De la Llera.Lateral torsional couplingin structures isolated with the frictional pendulum system[A].Proc.of the 12th WCEE,Auckland,NewZealand,2000
[37]JoséL Almazán and Juan C De la Llera.Physical modelfor dynamic analysis of structures with FPS isolators[J].Earthquake Engineering and Structural Dynamics,2003,32
[38]Murat Ero¨z.Advanced Models for Sliding SeismicIsolation and Applicatioons for Typical Multi-spanHighway Bridges[D]:Georgia Institute of Technology,December 2007
[39]Murat Ero¨z,Reginald DesRoches.Bridge seismicresponse as a function of the Friction Pendulum System(FPS)modeling assumptions[J].EngineeringStructures,2008,30
[40]Murat Ero¨z,Reginald DesRoches.ComparativeAssessment with Detailed Models of Sliding VersusElastomeric Seismic Isolation in Typical Multi-SpanBridges[A].Structures Congress 2008:CrossingBorders
[41]Ingham T J.Modeling of friction pendulum bearings forthe seismic analysis of bridges[A].First MITConference on Computational Fluid and Solid Mechanics[C],Cambridge,MA,2001
[42]Tim J Ingham.Analysis of the Million Dollar Bridge forseismic retrofit[J].Computers and Structures,2003,81
[43]Chaudhary A B,Bathe K J.A solution method for staticand dynamic analysis of 3-dimensional contact problemswith friction[J].Computers and Structures,1986;24
[44]Panos C Dimizas and Vlasis K Koumousis.Systemidentification of non-linear hysteretic system withapplication to friction pendulum isolation systems[A].5th GRACM International Congress on ComputationalMechanics[C],GRACM 05 Limassol,,2005
[45]Sinha R,Pranesh M.FPS isolator for structuralvibration control[A].Proc.of the InternationalConference on Theoretical,Applied,Computational andExperimental Mechanics[C],Kharagpur,India,1998
[46]Pranesh M,Sinha R.VFPI:An isolation device foraseimic design[J].Earthquake Engineering andStructural Dynamics.2000(29)
[47]Pranesh M,Sinha R.Aseismic design of tall structuresusing variable frequency pendulum isolator[A].Proc.of the 12th WCEE[C],Auckland,New Zealand,2000
[48]Pranesh M,Sinha R.Earthquake resistant design ofstructures using VFPI[J].J.Structural Engineering.2002,128(7)
[49]Pranesh Murnal,Ravi Sinha.Aseismic design ofstructure-equipment systems using variable frequencypendulum isolator[J].Nuclear Engineering and Design,2004,231
[50]Tsai C,Chiang T,Chen B.Finite element formulationsand theoretical study for variable curvature frictionpendulum system[J].Engineering Structures,2003,25
[51]吴政彦.变曲率滑动隔震结构之试验与分析[D].高雄:国立高雄第一科技大学硕士学位论文,2004Wu Cheng-Yen.Experimental and analysis of isolatedstructure with variable curvature sliding isolation[D].Kaohsiung:National Kaohsiung First University ofScience and Technology,2004(in Chinese)
[52]Lyan-Ywan Lu,Jain Wang,Chao-Chun Hsu.Slidingfrequency bearings for near-fault ground motions[A].4th International Conference on EarthquakeEngineering,Taipei,Taiwan October 12～13,2006
[53]王建.变曲率滑动隔震防制近断层震波之实验与分析[D]高雄:国立高雄第一科技大学硕士学位论文,2006Jian Wang.Experiment and Analysis of Near-FaultSeismic Isolation Using Sliding Bearings with VariableCurvatures[D].Kaohsiung:National Kaohsiung FirstUniversity of Science and Technology,2006(inChinese)
[54]叶奕麟.摇摆式隔震支承之理论与实验研究[D].高雄:国立高雄第一科技大学硕士学位论文,2008I-Ling Yeh.Analysis and Experiment of Base IsolationUsing Rocking Bearings[D].Kaohsiung:NationalKaohsiung First University of Science and Technology,2008(in Chinese)
[55]Hyakuda T,Saito K,Matsushita T,Tanaka N,YonekiS,Yasuda M,Miyazaki M,Suzuki A,Sawada T.Thestructural design and earthquake observation of a seismicisolation building using Friction Pendulum system[A].Proc.7th WCSI[C],Assisi,Italy,2001
[56]Tsai C S,Chiang T C,Chen B J.Experimental studyfor multiple Friction Pendulum system[A].Proc.of the13th WCEE[C],Vancouver,BC,Canada,2004
[57]Tsai C S,Chiang T C,Chen B J.Seismic behavior ofMFPS isolated structure under near-fault earthquakesand strong ground motions with long predominant periods[A].Proc.,2003 ASME Pressure Vessels and PipingConference[C],vol.1,Cleveland,Ohio,USA,2003
[58]Tsai C S,Chiang T C,Chen B J.Experimentalevaluation of piecewise exact solution for predictingseismic responses of spherical sliding type isolatedstructures[J].Earthquake Engineering and StructuralDynamics,2005,34(9)
[59]Tsai C S,Chen B J,Pong W S and Chiang T C.Interactive behavior of structures with multiple frictionpendulum isolation system and unbounded foundations[J].Advances in Structural Engineering,2004,7(6)
[60]Tsai C S,Cheng C K,Chen M J,et al.Experimentalstudy of MFPS-isolated sensitive equipment[A].Proc.of the 2003 ASME Pressure Vessels and PipingConference,Seismic Engineering[C],ASME,Denver,Colorado,USA,July 17～21,2005,8
[61]Tsai C S,Tsu-Cheng Chiang,Bo-Jen Chen.ShakingTable Tests of a Full Scale Steel Structure Isolated withMFPS[A].Proc.of the 2003 ASME Pressure Vesselsand Piping Conference[C],Cleveland,Ohio,U.S.A.,July,2003
[62]Tsai C S,Wen-Shin Chen,Tsu-Cheng Chiang,Bo-JenChen.Component and shaking table tests for full-scalemultiple friction pendulum system[J].EarthquakeEngineering and Structural Dynamics,2006,35
[63]Young-Suk Kim,Chung-Bang Yun.Seismic responsecharacteristics of bridges using double concave frictionpendulum bearings with tri-linear behavior[J].Engineering Structures,2007,29
[64]Constantinou M C.Friction Pendulum double concavebearing[R].NEES Report,October 29,2004
[65]Daniel M Fenz and Michael C.Constantinou.Behaviourof the double concave Friction Pendulum bearing[J].Earthquake Engineering and Structural Dynamics,2006,35
[66]Troy A Morgan.The Use of innovative base isolationsystems to achieve complex seismic performanceobjectives[D]:University of California,Berkeley,2007
[67]Troy A Morgan,Stephen A Mahin.Satisfying Drift andAcceleration Criteria with Multi-Stage Friction PendulumIsolation Systems[A].18th Analysis and ComputationSpecialty Conference[C]
[68]Troy A Morgan and Stephen A.Mahin.TheOptimization of Multi-Stage Friction Pendulum Isolatorsfor Loss Mitigation Considering a Range of SeismicHazard[A].Proc.of the 14th WCEE[C],October 12～17,2008,Beijing,China
[69]Daniel M Fenz and Michael C Constantinou.Sphericalsliding isolation bearings with adaptive behavior:Theory[J].Earthquake Engineering and Structural Dynamics,2008,37
[70]Daniel M Fenz,Michael C Constantinou.ModelingTriple Friction Pendulum Bearings for Response-HistoryAnalysis[J].Earthquake Spectra,2008,12(4)
[71]Daniel M Fenz and Michael C Constantinou.Sphericalsliding isolation bearings with adaptive behavior:Experimental verification[J].Earthquake Engineeringand Structural Dynamics,2008,37
[72]Earthquake Protection Systems(EPS),Technicalcharacteristics of friction pendulum bearings[E].http://www.earthquakeprotection.com/TechnicalCharacteristicsofFPBearngs.pdf
[73]Tsai C S,Lin Y C and Chen W S.Seismic behavior ofhigh-tech facility isolated with a trench friction pendulumsystem[A].Proc.of PVP2006-ICPVT-11-93474,2006ASME Pressure Vessels and Piping Division Conference,Vancouver[C],BC,Canada,July 23～27
[74]许立德.沟槽式摩擦单摆隔震器于结构物之仿真分析与应用[D].台中:逢甲大学硕士学位论文,2006Hsu Li-Te.Simulation,Analysis and Applications ofStructures with Trench Friction Pendulum System[D].Taizhong:Feng Chia University,2006(in Chinese)
[75]李至彬.沟槽式摩擦单摆隔震器(TFPS)于贵重仪器设备之应用[D].台中:逢甲大学硕士学位论文,2008.Li Chin-Pin.Application of Trench Friction PendulumSystem to Motion Sensitive Equipment[D].Taizhong:Feng Chia University,2008(in Chinese)
[76]Tsai C S,Lu Po-Ching,Chen Wen-Shin,Yung-ChangLin.Applications of Trench and Trajectory FrictionPendulum Systems to Seismic Mitigation of Structures[A].Proc.of the 14th WCEE[C],October 12～17,2008,Beijing,China
[77]Tsai C S,and Lin Yung-Chang.MechanicalCharacteristics and Modeling of Multiple Trench FrictionPendulum System with Multi-intermediate Sliding Plates[A].Proc.of World Academy of Science,Engineeringand Technology[C],Volume38,February 2009
[78]陈家奇.沟槽式摩擦复摆隔震器于结构物之仿真分析与应用.[D].台中:逢甲大学硕士学位论文,2007Chia-chi Chen.Simulation,Analysis and Applicationsof Structure with Multiple Trench Friction PendulumSystem[D]Taizhong:Feng Chia University,2007(inChinese)
[79]Marin C C.Experimental and analytical study of theXY-Friction Pendulum(XY-FP)bearing for bridgeapplications[D].State University of New York atBuffalo,Buffalo,New York,2006
[80]Roussis P C.Experimental and analytical studies ofstructures seismically isolated with an upliftrestraintisolation system[D].State University of New York atBuffalo,Buffalo,New York,2004
[81]Roussis P and Constnatinou M.Experimental andAnalytical Study of Seismically Isolated Structures withUplift Restraint[A].Proc.of the 13th WCEE[C],Vancouver,B.C.,Canada,2004
[82]Roussis P C and Constantinou M C.Experimental andAnalytical Studies of Structures Seismically Isolated withan Uplift-Restraint Isolation System[R].TechnicalReport MCEER-05-0001,2005
[83]Roussis P C and Constantinou M C.Uplift-restrainingFriction Pendulum seismic isolation system[J].Earthquake Engineering and Structural Dynamics,2006,35(5)
[84]Roussis P C and Constantinou M C.Experimental andanalytical studies of structures seismically isolated withan uplift-restraining friction pendulum system[J].Earthquake Engineering and Structural Dynamics,2006,35(5)
[85]Sampson Huang,Matthew Skokan,Saiful Islam.Essential Facility Benefits from New Base IsolationTechnology[A].Proc.of Structures[C],2006
[86]Amarnath Kasalanati,Michael C Constantinou.Testingand Modeling of Prestressed Isolators[J].J.StructuralEngineering,ASCE,2005,131(6)
[87]Tsai C S,Lu P C,Chen W S.Shaking table tests of abuilding isolated with a trench friction pendulum system[A].Proc.of PVP2006-ICPVT11-93253,2006 ASMEPressure Vessels and Piping Conference,SeismicEngineering,Vancouver[C],BC,Canada,July,2006
[88]Tsai C S,Wen-Shin Chen,Chiang T C,et al.SeismicMitigation of Structures Using Direction-OptimizedFriction Pendulum System[A].Proc.of the 14th WCEE[C],October 12～17,2008,Beijing,China
[89]杨振宗.方向优化之摩擦单摆隔震器模拟分析与应用[D].台中:逢甲大学硕士学位论文,2007Chen-Tsung Yang.Simulation,Analysis andApplications of Direction Optimized Friction PendulumSystem[D].Taizhong:Feng Chia University,2007(inChinese)
[90]林中城.方向优化之摩擦单摆隔震器(DO-FPS)于贵重仪器设备之应用[D]台中:逢甲大学硕士学位论文,2008Chung-Cheng Lin.Application of Direction-OptimizedFriction Pendulum System to Motion Sensitive Equipment[D].Taizhong:Feng Chia University,2008(inChinese)
[91]Tsai C S,Lu Po-Ching,Wen-Shin Chen et al.Finiteelement formulation and shaking table tests of direction-optimized friction pendulum system[J].EngineeringStructures,2008,30
[92]林家绿.方向优化之摩擦复摆隔震器的模拟、分析与应用.[D].台中:逢甲大学硕士学位论文,2008Chia-Lu.Simulation,Analysis and Applications ofMultiple Direction Optimized Friction Pendulum System[D].Taizhong:Feng Chia University,2008(inChinese)
[2]Zayas V,Low S,Bozzo L and Mahin S.Feasibility andPerformance Studies on Improving The EarthquakeResistance of New and Existing Buildings Using TheFriction Pendulum System[R].Technical Report UBC/EERC-89/09,University of California at Berkeley,1989
[3]Zayas V,Low S and Mahin S.A simple pendulumtechnique for achieving seismic isolation[J].Earthquake Spectra,1990,6
[4]Mokha A,Constantinou M C and Reinhorn A M.Teflonbearings in aseismic base isolation.Experimental studiesand mathematical modeling[R].Report No.NCEER-88-0038,State Univ.of New York,Buffalo,N.Y,1988
[5]Su L,Ahmadi G and Tadjbakhsh I.A comparative studyof performance of various base isolation systems,part I:Shear beam structures[J].Earthquake Engineering andStructural Dynamics.,1989,18(1)
[6]Constantinou M C,Mokha A and Reinhorn A M.Teflonbearings in base isolation II:Modeling[J].J.Structural Engineering,ASCE,1990,116(2)
[7]陈永祁,杨凤利,刘林.摩擦摆隔震桥梁的设计及应用[J].工业建筑,2009,增刊Chen Yong-qi,Yang Feng-li,Liu Lin.Design andApplication of Friction Pendulum Bearing for SeismicIsolated Bridges[J].Industrial Construction,supplementary issue,2009(in Chinese)
[8]Victor Zayas,Theodore Piepenbrock,Tahmeed Al-Hussaini.Summary of testing of the friction pendulumseismic isolation system 1986～1993[A].Preprint:Proc.,“ATC-17-1,Seminar on Seismic Isolation,Passive Energy Dissipation,and Active Control”,Applied Technology Council,Redwood City,CA94065,March 1993
[9]Zayas V A,Contantinou M C,Tsopelas P,Kartoum A.Testing of Friction Pendulum Seismic Isolation Bearingsfor Bridges[A].The 4th World Congress On Joints AndBearings[C],September 1996,Sacramento,California
[10]Constantinou M C,Caccese J,Harris H G.Frictionalcharacteristics of teflon-steel interfaces under dynamicconditions[J].Earthquake Engineering and StructuralDynamics,1987,15(6)
[11]Mokha A S,Constantinou M C and Reinhorn A M.Teflon bearing in base isolation.I,Testing[J].J.Structural Engineering,ASCE,1990,Vol.116
[12]Mokha A,Constantinou M and Reinhorn A.Experimental study of friction-pendulum isolation system[J].J.Structural Engineering,ASCE,1991,117
[13]Mokha A,Constantinou M and Reinhorn A.Verificationof friction model of Teflon bearings under Triaxial load[J].J.Structural Engineering,ASCE,1993,119
[14]Mokha A S,Constantinou M C and Reinhorn A M.Further results on frictional properties of Teflon bearings[J].J.Structural Engineering,1991,117(2)
[15]Constantinou M,Tsopelas P,Kasalanati A,Wolf E.Property modification factors for seismic isolationbearings[R].Technical Report MCEER-99-0012,StateUniv.of New York,Buffalo,NY,1999
[16]Kasalanati A,Constantinou M.Experimental study ofbridge elastomeric and other isolation and energydissipation systems with emphasis on uplift preventionand high velocity near source seismic excitation[R].Technical Report MCEER-99-0004,State Univ.of NewYork,Buffalo,NY,1999
[17]Seible F.Uni-directional Cylindrical FP bearings forretrofit of West Span of San Francisco-Oakland BayBridge[R].UCSD Test Report,2001
[18]Seible F.FP bearing for Bolu Viaduct Project forgovernment of Turkey[R].UCSD Test Report 2001
[19]Seible F.FP bearings for retrofit of I-40 project[R].UCSD Test Report,Tennessee DOT,2002
[20]Daniel Fenz.Frictional properties of non-metallicmaterials for use in sliding bearings:an experimentalstudy[E].http://mceer.buffalo.edu/publications/resaccom/02-SP09/pdfs_screen/19_Fenz.pdf
[21]Ryuichi Kousaka,Hironori Hamazaki,Nobuo Murota,and Mineo Takayama.Experimental Study on Durabilityof Sliding Bearings under Long Duration DynamicLoading[A].Proc.of the 14th WCEE[C],Oct.,12-17,2008,Beijing,China
[22]Hyakuda T,Saitok K,Matsushita T,et al.Thestructural design and earthquake observation of a seismicisolated building using friction pendulum system[A].Proc.of The 7th International Seminar on SeismicIsolation,Passive Energy Dissipation and Active Controlof Vibrations of Structures[C],Assisi,Italy,October 2～5,2001
[23]郭品宏.球面摩擦型隔震器之组件试验[D].台北:国立台北科技大学硕士学位论文,2001Pin Hung-Kuo.Component Test of Spherical SlidingIsolators[D].Taipei:National Taipei University ofTechnology,2001(in China)
[24]江子政.复摆隔震器于防震工程之应用[D].台中:逢甲大学博士学位论文,2004Tsu-Cheng Chiang.Applications of Multiple FrictionPendulum System in Seismic Engineering[D].Taizhong:Feng Chia University,2004(in Chinese)
[25]曾旭玟.高分子材料于结构隔震技术之应用[D].高雄.国立高雄第一科技大学硕士学位论文,2004Shiu Wen Tzeng.Application of Polymer Materials forBase Isolation of Seismic Structures[D].Kaohsiung:National Kaohsiung First University of Science andTechnology,2004(in Chinese)
[26]Wenying Hu.Analysis Effectiveness of Bridges withPartial Isolation[D].Utah State University Logan,Utah,2008
[27]SAP 2000.Computers and Structures Inc.:Berkeley,CA,1999[E].http://www.csiberkeley.com/
[28]Tsopelas P C,Constantinou M C,Reinhorn A M.3D-BASIS-ME:computer program for nonlinear dynamicanalysis of seismically isolated single and multiplestructures and liquid storage tanks[R].Report NCEER-94-0010,State Univ.of New York,Buffalo,1994
[29]Eric Abrahamson,Steve Mitchell.Seismic responsemodification device elements for bridge structuresdevelopment and verification[J].Computers andStructures,2003,81
[30]王建强,管品武,李大望.摩擦摆基础隔震结构双向地震反应分析[J].世界地震工程,2005,21(3)Wang Jian-qiang,Guan Pin-wu,Li Da-wang.Analysisof seismic response of base-isolated structures withfriction pendulum system under bilateral ground motions[J].World Earthquake Engineering,2005,21(3)(inChinese)
[31]王建强,丁永刚,李大望.摩擦摆支座恢复力模型研究[J].四川建筑科学研究,2007,33(3)Wang Jian-qiang,Ding Yong-gang,Li Da-wang.Studyon restoring force model of friction pendulum isolator[J].Sichuan Building Science,2007,33(3)(inChinese)
[32]Jianqiang Wang,Dawang Li.Analysis on seismicresponse of base-isolated structures with frictionpendulum system under bilateral ground motions[A].Proc.of the 11th International Conference onEngineering,Science,Construction,and Operations inChallenging Environments[C],2008 Long Beach,CA
[33]焦驰宇,胡世德,管仲国.FPS抗震支座分析模型的比较研究[J].振动与冲击,2007,26(10)Jiao Chi-yu,Hu Shi-de,Guan Zhong-gu.Comparisonstudy on analysis models of FPS seismic isolation support[J].J.Vibration and Shock,2007,26(10)(inChinese)
[34]JoséL Almazán,Juan C De la Llera.Analytical modelof structures with frictional pendulum isolators[J].Earthquake Engineering and Structural Dynamics,2002,31(2)
[35]J Almazán,J De la Llera and J Inaudi.Modelingaspects of structures isolated with the friction pendulumsystem[J].Earthquake Engineering and StructuralDynamics,1998,27
[36]J Almazán and J De la Llera.Lateral torsional couplingin structures isolated with the frictional pendulum system[A].Proc.of the 12th WCEE,Auckland,NewZealand,2000
[37]JoséL Almazán and Juan C De la Llera.Physical modelfor dynamic analysis of structures with FPS isolators[J].Earthquake Engineering and Structural Dynamics,2003,32
[38]Murat Ero¨z.Advanced Models for Sliding SeismicIsolation and Applicatioons for Typical Multi-spanHighway Bridges[D]:Georgia Institute of Technology,December 2007
[39]Murat Ero¨z,Reginald DesRoches.Bridge seismicresponse as a function of the Friction Pendulum System(FPS)modeling assumptions[J].EngineeringStructures,2008,30
[40]Murat Ero¨z,Reginald DesRoches.ComparativeAssessment with Detailed Models of Sliding VersusElastomeric Seismic Isolation in Typical Multi-SpanBridges[A].Structures Congress 2008:CrossingBorders
[41]Ingham T J.Modeling of friction pendulum bearings forthe seismic analysis of bridges[A].First MITConference on Computational Fluid and Solid Mechanics[C],Cambridge,MA,2001
[42]Tim J Ingham.Analysis of the Million Dollar Bridge forseismic retrofit[J].Computers and Structures,2003,81
[43]Chaudhary A B,Bathe K J.A solution method for staticand dynamic analysis of 3-dimensional contact problemswith friction[J].Computers and Structures,1986;24
[44]Panos C Dimizas and Vlasis K Koumousis.Systemidentification of non-linear hysteretic system withapplication to friction pendulum isolation systems[A].5th GRACM International Congress on ComputationalMechanics[C],GRACM 05 Limassol,,2005
[45]Sinha R,Pranesh M.FPS isolator for structuralvibration control[A].Proc.of the InternationalConference on Theoretical,Applied,Computational andExperimental Mechanics[C],Kharagpur,India,1998
[46]Pranesh M,Sinha R.VFPI:An isolation device foraseimic design[J].Earthquake Engineering andStructural Dynamics.2000(29)
[47]Pranesh M,Sinha R.Aseismic design of tall structuresusing variable frequency pendulum isolator[A].Proc.of the 12th WCEE[C],Auckland,New Zealand,2000
[48]Pranesh M,Sinha R.Earthquake resistant design ofstructures using VFPI[J].J.Structural Engineering.2002,128(7)
[49]Pranesh Murnal,Ravi Sinha.Aseismic design ofstructure-equipment systems using variable frequencypendulum isolator[J].Nuclear Engineering and Design,2004,231
[50]Tsai C,Chiang T,Chen B.Finite element formulationsand theoretical study for variable curvature frictionpendulum system[J].Engineering Structures,2003,25
[51]吴政彦.变曲率滑动隔震结构之试验与分析[D].高雄:国立高雄第一科技大学硕士学位论文,2004Wu Cheng-Yen.Experimental and analysis of isolatedstructure with variable curvature sliding isolation[D].Kaohsiung:National Kaohsiung First University ofScience and Technology,2004(in Chinese)
[52]Lyan-Ywan Lu,Jain Wang,Chao-Chun Hsu.Slidingfrequency bearings for near-fault ground motions[A].4th International Conference on EarthquakeEngineering,Taipei,Taiwan October 12～13,2006
[53]王建.变曲率滑动隔震防制近断层震波之实验与分析[D]高雄:国立高雄第一科技大学硕士学位论文,2006Jian Wang.Experiment and Analysis of Near-FaultSeismic Isolation Using Sliding Bearings with VariableCurvatures[D].Kaohsiung:National Kaohsiung FirstUniversity of Science and Technology,2006(inChinese)
[54]叶奕麟.摇摆式隔震支承之理论与实验研究[D].高雄:国立高雄第一科技大学硕士学位论文,2008I-Ling Yeh.Analysis and Experiment of Base IsolationUsing Rocking Bearings[D].Kaohsiung:NationalKaohsiung First University of Science and Technology,2008(in Chinese)
[55]Hyakuda T,Saito K,Matsushita T,Tanaka N,YonekiS,Yasuda M,Miyazaki M,Suzuki A,Sawada T.Thestructural design and earthquake observation of a seismicisolation building using Friction Pendulum system[A].Proc.7th WCSI[C],Assisi,Italy,2001
[56]Tsai C S,Chiang T C,Chen B J.Experimental studyfor multiple Friction Pendulum system[A].Proc.of the13th WCEE[C],Vancouver,BC,Canada,2004
[57]Tsai C S,Chiang T C,Chen B J.Seismic behavior ofMFPS isolated structure under near-fault earthquakesand strong ground motions with long predominant periods[A].Proc.,2003 ASME Pressure Vessels and PipingConference[C],vol.1,Cleveland,Ohio,USA,2003
[58]Tsai C S,Chiang T C,Chen B J.Experimentalevaluation of piecewise exact solution for predictingseismic responses of spherical sliding type isolatedstructures[J].Earthquake Engineering and StructuralDynamics,2005,34(9)
[59]Tsai C S,Chen B J,Pong W S and Chiang T C.Interactive behavior of structures with multiple frictionpendulum isolation system and unbounded foundations[J].Advances in Structural Engineering,2004,7(6)
[60]Tsai C S,Cheng C K,Chen M J,et al.Experimentalstudy of MFPS-isolated sensitive equipment[A].Proc.of the 2003 ASME Pressure Vessels and PipingConference,Seismic Engineering[C],ASME,Denver,Colorado,USA,July 17～21,2005,8
[61]Tsai C S,Tsu-Cheng Chiang,Bo-Jen Chen.ShakingTable Tests of a Full Scale Steel Structure Isolated withMFPS[A].Proc.of the 2003 ASME Pressure Vesselsand Piping Conference[C],Cleveland,Ohio,U.S.A.,July,2003
[62]Tsai C S,Wen-Shin Chen,Tsu-Cheng Chiang,Bo-JenChen.Component and shaking table tests for full-scalemultiple friction pendulum system[J].EarthquakeEngineering and Structural Dynamics,2006,35
[63]Young-Suk Kim,Chung-Bang Yun.Seismic responsecharacteristics of bridges using double concave frictionpendulum bearings with tri-linear behavior[J].Engineering Structures,2007,29
[64]Constantinou M C.Friction Pendulum double concavebearing[R].NEES Report,October 29,2004
[65]Daniel M Fenz and Michael C.Constantinou.Behaviourof the double concave Friction Pendulum bearing[J].Earthquake Engineering and Structural Dynamics,2006,35
[66]Troy A Morgan.The Use of innovative base isolationsystems to achieve complex seismic performanceobjectives[D]:University of California,Berkeley,2007
[67]Troy A Morgan,Stephen A Mahin.Satisfying Drift andAcceleration Criteria with Multi-Stage Friction PendulumIsolation Systems[A].18th Analysis and ComputationSpecialty Conference[C]
[68]Troy A Morgan and Stephen A.Mahin.TheOptimization of Multi-Stage Friction Pendulum Isolatorsfor Loss Mitigation Considering a Range of SeismicHazard[A].Proc.of the 14th WCEE[C],October 12～17,2008,Beijing,China
[69]Daniel M Fenz and Michael C Constantinou.Sphericalsliding isolation bearings with adaptive behavior:Theory[J].Earthquake Engineering and Structural Dynamics,2008,37
[70]Daniel M Fenz,Michael C Constantinou.ModelingTriple Friction Pendulum Bearings for Response-HistoryAnalysis[J].Earthquake Spectra,2008,12(4)
[71]Daniel M Fenz and Michael C Constantinou.Sphericalsliding isolation bearings with adaptive behavior:Experimental verification[J].Earthquake Engineeringand Structural Dynamics,2008,37
[72]Earthquake Protection Systems(EPS),Technicalcharacteristics of friction pendulum bearings[E].http://www.earthquakeprotection.com/TechnicalCharacteristicsofFPBearngs.pdf
[73]Tsai C S,Lin Y C and Chen W S.Seismic behavior ofhigh-tech facility isolated with a trench friction pendulumsystem[A].Proc.of PVP2006-ICPVT-11-93474,2006ASME Pressure Vessels and Piping Division Conference,Vancouver[C],BC,Canada,July 23～27
[74]许立德.沟槽式摩擦单摆隔震器于结构物之仿真分析与应用[D].台中:逢甲大学硕士学位论文,2006Hsu Li-Te.Simulation,Analysis and Applications ofStructures with Trench Friction Pendulum System[D].Taizhong:Feng Chia University,2006(in Chinese)
[75]李至彬.沟槽式摩擦单摆隔震器(TFPS)于贵重仪器设备之应用[D].台中:逢甲大学硕士学位论文,2008.Li Chin-Pin.Application of Trench Friction PendulumSystem to Motion Sensitive Equipment[D].Taizhong:Feng Chia University,2008(in Chinese)
[76]Tsai C S,Lu Po-Ching,Chen Wen-Shin,Yung-ChangLin.Applications of Trench and Trajectory FrictionPendulum Systems to Seismic Mitigation of Structures[A].Proc.of the 14th WCEE[C],October 12～17,2008,Beijing,China
[77]Tsai C S,and Lin Yung-Chang.MechanicalCharacteristics and Modeling of Multiple Trench FrictionPendulum System with Multi-intermediate Sliding Plates[A].Proc.of World Academy of Science,Engineeringand Technology[C],Volume38,February 2009
[78]陈家奇.沟槽式摩擦复摆隔震器于结构物之仿真分析与应用.[D].台中:逢甲大学硕士学位论文,2007Chia-chi Chen.Simulation,Analysis and Applicationsof Structure with Multiple Trench Friction PendulumSystem[D]Taizhong:Feng Chia University,2007(inChinese)
[79]Marin C C.Experimental and analytical study of theXY-Friction Pendulum(XY-FP)bearing for bridgeapplications[D].State University of New York atBuffalo,Buffalo,New York,2006
[80]Roussis P C.Experimental and analytical studies ofstructures seismically isolated with an upliftrestraintisolation system[D].State University of New York atBuffalo,Buffalo,New York,2004
[81]Roussis P and Constnatinou M.Experimental andAnalytical Study of Seismically Isolated Structures withUplift Restraint[A].Proc.of the 13th WCEE[C],Vancouver,B.C.,Canada,2004
[82]Roussis P C and Constantinou M C.Experimental andAnalytical Studies of Structures Seismically Isolated withan Uplift-Restraint Isolation System[R].TechnicalReport MCEER-05-0001,2005
[83]Roussis P C and Constantinou M C.Uplift-restrainingFriction Pendulum seismic isolation system[J].Earthquake Engineering and Structural Dynamics,2006,35(5)
[84]Roussis P C and Constantinou M C.Experimental andanalytical studies of structures seismically isolated withan uplift-restraining friction pendulum system[J].Earthquake Engineering and Structural Dynamics,2006,35(5)
[85]Sampson Huang,Matthew Skokan,Saiful Islam.Essential Facility Benefits from New Base IsolationTechnology[A].Proc.of Structures[C],2006
[86]Amarnath Kasalanati,Michael C Constantinou.Testingand Modeling of Prestressed Isolators[J].J.StructuralEngineering,ASCE,2005,131(6)
[87]Tsai C S,Lu P C,Chen W S.Shaking table tests of abuilding isolated with a trench friction pendulum system[A].Proc.of PVP2006-ICPVT11-93253,2006 ASMEPressure Vessels and Piping Conference,SeismicEngineering,Vancouver[C],BC,Canada,July,2006
[88]Tsai C S,Wen-Shin Chen,Chiang T C,et al.SeismicMitigation of Structures Using Direction-OptimizedFriction Pendulum System[A].Proc.of the 14th WCEE[C],October 12～17,2008,Beijing,China
[89]杨振宗.方向优化之摩擦单摆隔震器模拟分析与应用[D].台中:逢甲大学硕士学位论文,2007Chen-Tsung Yang.Simulation,Analysis andApplications of Direction Optimized Friction PendulumSystem[D].Taizhong:Feng Chia University,2007(inChinese)
[90]林中城.方向优化之摩擦单摆隔震器(DO-FPS)于贵重仪器设备之应用[D]台中:逢甲大学硕士学位论文,2008Chung-Cheng Lin.Application of Direction-OptimizedFriction Pendulum System to Motion Sensitive Equipment[D].Taizhong:Feng Chia University,2008(inChinese)
[91]Tsai C S,Lu Po-Ching,Wen-Shin Chen et al.Finiteelement formulation and shaking table tests of direction-optimized friction pendulum system[J].EngineeringStructures,2008,30
[92]林家绿.方向优化之摩擦复摆隔震器的模拟、分析与应用.[D].台中:逢甲大学硕士学位论文,2008Chia-Lu.Simulation,Analysis and Applications ofMultiple Direction Optimized Friction Pendulum System[D].Taizhong:Feng Chia University,2008(inChinese)
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心