危岩稳定性分析方法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
通过试验建立了同时考虑危岩主控结构面贯通率和防治工程安全等级的危岩主控结构面抗剪强度参数贯通率法;按照出现频率,将作用在危岩体上的荷载拟定为三种荷载组合(工况)。认为处于特大型水利工程区或高频率强烈地震区的一级防治工程,应将设计荷载组合调整为"自重+裂隙水压力(暴雨状态)+地震力";基于极限平衡理论详细推导了滑塌式危岩、倾倒式危岩和坠落式危岩在不同荷载组合下的稳定系数计算方法,结合稳定性评价标准,系统建立了危岩稳定性分析方法。应用这种危岩主控结构面抗剪强度参数贯通率法确定的c、φ值比规范推荐的长度加权方法随机性要小,经2001~2007年现场观测验证计算结果是比较符合实际情况的。
A method to identify anti-shear strength parameters,considering the joint ratio of the control fissure and the safety grade for control engineering simultaneously is established in accordance with a quantity of tests and observations.In views of appearance frequency of loads acting on perilous rock,three types of load composites are designated.For any top grade engineering sitting in giant hydraulic project or strong earthquake region,the design loads must be adjusted as weight & fissure pressure in rainstorm status & earthquake force.For the sliding perilous rock,the toppling perilous rock and the falling perilous rock,methods for calculating the factor of stability under various load composites are deduced in detail with the limit equilibrium theory,which are the reasonable stability analyses together with appraisal criteria for stability of perilous rock.Comparing with the randomicity of the values of c and φ,the value obtained by the linking ratio method for the anti-shear strength parameters of control fissure is smaller than the based on weighting methods suggested in the criterion.And the result is more consistent with the fact than the criterion site observation from 2001 to 2007.
引文
[1]Chen Hongkai,Tang Hongmei,Ye Siqiao.Damage model ofcontrol fissure in perilous rock[J].Applied Mathematics andMechanics,2006,27(3):967-974.
    [2]陈洪凯,唐红梅,叶四桥,等.危岩防治原理[M].北京:地震出版社,2006.
    [3]地质灾害防治工程设计规范:DB50/5029-2004[S].重庆市,2004.
    [4]谢全敏,夏元友.危岩块体稳定性的综合评价方法分析[J].岩土力学,2002,23(6):777-781.
    [5]常中华,陈厚军,张乐中,等.奎屯河龙口右岸山体崩塌原因及再次失稳可能性分析[J].工程地质学报,2005,13(1):76-80.
    [6]何应强,宋根才,马跃刚.索风营水电站Dr2危岩体稳定性研究[J].中国农村水利水电,2005,(5):87-90.
    [7]谭继文,李润伟,马志强,等.江口水电站拱坝左岸1号危岩体稳定分析[J].东北水利水电,2005,23(1):9-10.
    [8]陈洪凯,唐红梅,王蓉.三峡库区危岩稳定性计算方法及应用[J].岩石力学与工程学报,2004,23(4):614-619.
    [9]陈洪凯,唐红梅.危岩主控结构面疲劳断裂寿命计算方法[J].应用数学和力学,2007,28(5):575-580.
    [10]杜时贵.岩体结构面的工程性质[M].北京:地震出版社,1999.
    [11]Kulatilake P H S W,Balasingam P,Jinyong Park,et al.Nat-ural rock joint roughness quantification through fractal tech-niques[J].Geotechnical and Geological Engineering,2006,24(5):1181-1202.
    [12]Kulatilake P H S W,Shou G,Huang T H.Spectral-basedpeak-shear-strength criterion for rock joints[J].Journal ofGeotechnical Engineering,1995,121(11):789-796.
    [13]Hammah R E,Curran J H.Fuzzy cluster algorithm for theautomatic identification of joint sets[J].International Journalof Rock Mechanics and Mining Sciences,1998,35(7):889-905.
    [14]王鹏,赵学亮,万林海,等.基于GA和FCM的岩体结构面的混合聚类方法[J].北京科技大学学报,2004,26(3):227-232.
    [15]陈洪凯,唐红梅.危岩主控结构面强度参数计算方法[J].工程地质学报,2007,16(1):37-41.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心