结构振动控制系统模拟电路的设计与仿真
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用模拟电路对结构振动控制系统进行仿真分析,将结构振动控制系统的结构动力参数的调整转换为模拟电路中电路元件参数的调节,为振动控制系统的研究与分析提供了较大的方便。针对建筑结构振动控制系统,详细介绍了模拟电路的设计方法,并结合一个具体算例构建其模拟电路进行仿真分析,体现了该方法的简便性。采用经典的Newmark-β数值算法对基于模拟电路的仿真结果进行了验证,说明了本文给定方法的正确性。
The analog circuits was used in simulation analysis of the structure vibration control system,the regulation of circuit element parameters in analog circuit insteads of the adjustment of dynamic parameters of structure vibration control system,which is very convenient on the study and analysis of the structure vibration control system.The design method of the analog circuit diagram was introduced in detail based on structural vibration control system.The simulation is carried on through building the analog circuit diagram aiming at an example,which embodies simplicity of the method.The simulation results based on analog circuit diagram are verified using of the classic Newmark-β numerical algorithm.The correctness of the method given in this paper was shown.
引文
[1]欧进萍.结构主动、半主动和智能控制[M].北京:科学出版社, 2003
    [2]李宏男等.结构振动与控制[M].北京:中国建筑工业出版社, 2005
    [3]徐赵东,郭迎庆.MATLAB语言在建筑抗震工程中的应用[M].北京:科学出版社,2004
    [4]杜永峰,李慧.地震下结构振动的最优控制算法模型比较与改进[J].世界地震工程,2005,21(3):57-62
    [5]Soong TT.State of the art review;Active structural control in civil engineering [J].Eng Struct,1988,10:74 - 84
    [6]Suhardjo J,Spencer JR B F,Sain M K.Feedback-feedforward control of structures under seismic excitation[J].Structural Safety,1990,8: 69 - 89
    [7]李春锋,杜永峰等.双塔柔性连体结构地震响应等效试验电路设计与实现[J].特种结构,2010(1):40-44

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心