自组织神经网络在钢板和橡胶粘结缺陷检测中的应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
利用超声波对钢板和橡胶的粘结质量进行检测.通过分析回波信号的谐波振幅、频率等信息,提取出了信号能量、奇异波的峰值和数量,并采用自组织神经网络分类算法对钢板和橡胶的粘结质量进行了定量分析.分析结果表明,自组织神经网络可以有效地对钢板和橡胶的粘结质量进行分类和识别.
Bonding quality of steel plates and rubber with ultrasonic waves is expounded,the signal energy,peak value and the quantity of singular waves are extracted by analyzing the harmonics of the echo signal amplitude,frequency and so on.The self-organizing neural network classification algorithm is adopted to quantitative analysis of bonding quality of steel plates and rubber.The results show that this method is effective to classify and identify the bonding quality of steel plates and rubber.
引文
[1]夏金东.金属材料超声探伤缺陷智能识别方法的初步研究[D].北京:中国矿业大学,2002.
    [2]刘镇清,陈广.超声无损检测中的谱分析技术[J].无损检测,2001,2:85-88.
    [3]赵永刚.基于时频分析和神经网络的薄板粘结缺陷超声检测研究[D].呼和浩特:内蒙古大学,2008.
    [4]刘旭,夏金东,弓乐,等.超声检测缺陷分类中信号处理方法的探讨[J].仪器仪表学报,2002,23(6):638-641.
    [5]李惠芳,常宁.基于神经网络的金属与非金属材料粘接质量定量检测[J].北京工业大学学报,2009,35(8):1122-1125.
    [6]李忠献,杨晓明,丁阳.应用人工神经网络技术的大型斜拉桥子结构损伤识别研究[J].地震工程与工程震动,2003,23(3):92-99.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心