SRC柱塑性铰区域变形性能试验研究

详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文

英文篇名：Experimental study on deformation behavior of SRC columns at plastic hinge 中文刊名：地震工程与工程振动 英文刊名：Journal of Earthquake Engineering and Engineering Vibration 作者：刘阳 ; 郭子雄 ; 林煌 英文作者：LIU Yang1 ; GUO Zixiong1 ; LIN Huang1 ; 2(1.College of Civil Engineering ; Huaqiao University ; Quanzhou 362021 ; China ; 2.Good Broad(Fujian) Architects Association. ; LTD ; Fuzhou 350001 ; China) 中文关键词：型钢混凝土柱 ; 塑性铰 ; 变形性能 ; 试验研究 英文关键词：steel reinforced concrete columns ; plastic hinge ; deformation behavior ; experimental study 出版日期：2011-02-15 机构：华侨大学土木工程学院;嘉博(福建)联合设计有限公司; 年：2011 期：01 出版单位：地震工程与工程振动

摘要

完成了8个1/2比例的型钢混凝土(SRC)柱在低周反复荷载作用下的试验研究。对试件塑性铰区域的弯曲变形和剪切变形进行了量测,通过量测数据计算不同变形成分对SRC柱层间位移的贡献并分析了其随加载过程的变化规律。试验研究表明,SRC柱塑性铰区的弯曲变形是引起层间位移的主要变形分量,塑性铰区的剪切变形对层间位移的贡献相对较小。本文成果可为SRC结构基于性能的抗震设计提供参考。
Eight half scaled core steel reinforced concrete(CSRC) columns were tested under cyclic loading.The flexural and shear deformation of SRC columns at plastic hinge were measured.Based on the test data and a simplified analysis of the global deformation,the percentage of each deformation component due to the plastic flexural deformation and shear deformation of plastic hinge and their characteristics were investigated.It is indicated that the story drift is mainly caused by the flexural deformation of plastic hinge.The contribution of the shear deformation of plastic hinge to the story drift is relatively small.This paper can be referenced for the performance-based seismic design and engineering practice of CSRC structures.

引文

[1]杨勇,郭子雄,聂建国,等.型钢混凝土结构ANSYS数值模拟技术研究[J].工程力学,2006,23(4):79-85,57.
    [2]李俊华,王新堂,薛建阳.型钢高强混凝土短柱的抗剪机理与抗剪承载力[J].工程力学,2008,25(4):191-199.
    [3]薛建阳,陈宗平,赵鸿铁.型钢混凝土异型柱受剪机理及承载力计算[J].建筑结构学报,2008,29(6):84-90.
    [4]郭子雄,张志伟,黄群贤,等.型钢混凝土柱恢复力模型试验研究[J].地震工程与工程振动,2009,29(5):79-85.
    [5]郭子雄.基于变形的抗震设计理论及应用研究[D].上海:同济大学,2000.