基于PERFORM-3D的筒中筒结构弹塑性时程分析与性能评估

英文篇名：Elastic-plastic Time History Analysis and Performance Evaluation of Tube-in-tube Structure Based on PERFORM-3D
中文刊名：科学技术与工程
英文刊名：Science Technology and Engineering
作者：李伦
英文作者：LI Lun(School of Civil Engineering and Transportation ; South China University of Technology ; Guangzhou 510640 ; P.R.China)
中文关键词：PERFORM-3D ; 筒中筒结构 ; 弹塑性时程分析 ; 性能
英文关键词：PERFORM-3D tube-in-tube structure elastic-plastic time history analysis performance
出版日期：2012-12-28
机构：华南理工大学土木与交通学院;
年：2012
期：36
出版单位：科学技术与工程

摘要

采用PERFORM-3D软件及纤维剪力墙单元,通过对一14层筒中筒结构试验模型进行弹塑性时程分析,并与试验结果对比,验证了软件模型的合理性。通过结构在不同烈度情况下的变形分析,具体研究了该结构的层间位移角分布,并参考美国性能规范ASCE41—06,对结构在弹塑性阶段的性能进行评估。得出在高烈度地震动下结构底部剪力墙出现较大塑性变形,以耗散大部分能量,同时给出相应的设计建议,为同类高层结构弹塑性分析提供参考。
Basing on the PERFORM-3D software and macroscopic shear wall unit,the results of elastic-plastic time history analysis in a 14-story tube-in-tube structure with the experiment results are compared,which verifies the rationality of the software model.The seismic response is calculated under different earthquake intensities,the inter-story drift distribution is discussed in details.To evaluate the structure behavior performance in elastic-plastic phase,america performance standard ASCE41-06 is used.Calculation results show that the base shear wall have a large plastic deformation to dissipate energy during high-intensity earthquake,meanwhile raising a design recommendation,which provides a reference of elastic-plastic analysis in similar high-rise structure.

引文

1 Computers&Structures Inc.PERFORM components andelements.2006
    2陈星霞.基于构件能量等效原理的框架结构拟弹塑性分析方法研究.广州:华南理工大学,2010
    3陈伯望,王海波,沈蒲生.钢筋混凝土筒中筒结构拟动力试验研究与理论分析.地震工程与工程振动,2006;26(6):87—92
    4GB50011—2010建筑抗震设计规范
    5 ASCE/SEC41—46 Seismic Rehabilitation of Existing Buildings.USA:American Society of Civil Engineers,2007