近距爆破源振动采集系统
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
本文根据工程爆破测试的需要,提出了一种近爆点的振动信号采集节点的设计方案。该节点中使用一种新型的MEMS拾振器,采用Altera公司FPGA作为主控制器芯片,其中集成控制逻辑单元与NiosII软核嵌入式处理器,二者结合成为单芯片控制器方案。控制器运用多路FIFO进行数据缓冲,顺序传输数据至外部存储器,实现了多路数据的同步采集。拾振器与数据记录仪结合成为一体化的信号采集节点。该节点采样频带宽,体积小。适合近爆区域恶劣环境地震波信号的采集,节点可以灵活布置组成不同测试方案。
A signal acquisition system scheme and the instrument around the blast area is provided for the blast monitor.The MEMS sensor are used in the instrument,then Altera FPGA in which the logic unit and the NiosII core are configured is used as the main controller,as a single chip plan.The FIFO memories are used as the buffer for parallel data,then the data is transported to SDRAM.The sensor and data acquisition instrument are integrated.This instrument is provided with the wide frequency and small volume,and it is applied for blast area.Kinds of measurement and monitor plans are posed by different placement of the instrument.
引文
[1]张雪亮,黄树堂.爆破地震效应[M].北京:地震出版社,1981.
    [2]孟吉复,惠新斌.爆破测试技术[M].北京:冶金工业出版社,1992.
    [3]李夕兵,凌同华,张义平.爆破震动信号分析理论与技术[M].北京:科学出版社,2009.
    [4]何军,于亚伦,梁文基.爆破振动信号的小波分析[J].岩土工程学报,1998,20(1):47-50.
    [5]林大超,施惠基,白春华.爆炸地震效应的时频分析[J].爆炸与冲击,2003,23(1):31-35.
    [6]顾毅成,史雅语,金骥良.工程爆破安全[M].合肥:中国科学技术大学出版社,2009.
    [7]铁道部铁道科学院.振动测试与分析[M].北京:人民铁道出版社,1978.
    [8]李德葆,陆秋海.工程振动试验分析[M].北京:清华大学出版社,2004.
    [9]严普强,乔陶鹏.工程中的低频振动测量与传感器[J].振动、测试与诊断,2002,22(4):247253.
    [10]Analog Device Inc..High Performance Wide Bandwidth Accelerometer.[EB/OL].[2011-313].
    [11]http://www.analog.com/zh/mems/high-gaccelerometers/adxl001/products/product.html.
    [12]原彦飞,尤文斌,李新娥.运用NAND闪存的负延时存储测试系统[M].仪器仪表学报,2006,27(6):1517-1518.
    [13]赵纯,裴东兴.水下爆炸冲击波测试系统的设计与实现[J].计量与测试技术,2009,36(2):3637.
    [14]杨年华,林世雄.爆破振动测试技术探讨[J].爆破,2000,17(3):90-92.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心