基于阶比分析与AR谱估计的发动机故障特征提取
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
提出了一种基于阶比分析和AR谱估计相结合的发动机故障诊断方法。在发动机急加速过程中拾取油底壳振动信号,将等时间间隔采样所得的非稳态信号按等角度间隔重采样,得到角域中的稳态信号,再进行AR谱估计,得到阶比AR谱。最后进行阶比带的谱幅值累加。结果表明,某些阶比带的谱幅累加值分别更明显地反映发动机曲轴轴承和连杆轴承的磨损故障特征。
An engine fault diagnosis method based on order ratio analysis and auto regression(AR) spectral estimation is proposed.The vibration signals of oil pan are picked up in the process of engine hard acceleration.The unstable signals sampled at equal time interval are converted into stable signals in angle domain by re-sampling at equal angle interval and then the order-based AR spectra are obtained by AR spectral estimation.Finally an adding-up manipulation of spectra amplitude in each successive order band is proceeded.The results show that some order bands more markedly reflect the wear fault feature of crankshaft bearings and connecting rod bearings respectively.
引文
[1]贾继德,刘忠刚,张平,等.基于阶比双谱分析的发动机故障特征提取[J].内燃机学报,2004,22(5):463-465.
    [2]聂建栋,卫红凯,李猛.几种不同模型参数估计法的性能分析[J].舰船电子对抗,2010,33(4):81-84.
    [3]张玲玲,赵懿冠,肖云魁,等.基于小波包-AR谱的变速器轴承故障特征提取[J].振动、测试与诊断,2011,31(4):492-495.
    [4]赵晓平,张令弥,郭勤涛.旋转机械阶比跟踪技术研究进展综述[J].地震工程与工程振动,2008,28(6):213-216.
    [5]昌琛,宋希庚,邹积斌.振动、噪声信号的阶比分析与DSP实现[J].数据采集与处理,2001,16(4):478-482.
    [6]肖云魁.汽车故障诊断学[M].北京:北京理工大学出版社,2006.
    [7]邹鲲,袁俊泉,袭享铱.Matlab6.x信号处理[M].北京:清华大学出版社,

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心