无线测控技术在红外干扰弹远程投放系统中的应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
根据导弹外场抗干扰试验的需求,通过无线数传电台组建网络的方法,设计了一套红外干扰弹远程投放系统。分别给出了地面测控站和投放控制终端的系统构成及软件流程。利用应用可编程技术,实现了程序的远程加载,特定的数据帧编码原则及去抖动设计,提高数据传输的可靠性。
Based on the requirements of missile’s anti-jamming trial in shooting range,a remote-launch control system has been designed by building a wireless data transfer radios network.This article includes the combination and software workflows of ground observe-control station and launch control terminal.The software has been loaded remotely by using in-application programming technology.The reliability of data transmission has been improved by designing a well-designed data frame’s coding principle and using elimination of jitter designation.
引文
[1]郑建辉.靶弹弹载红外干扰技术研究与应用[J].科技传播,2012,(14):102-103.
    [2]陈高锋.常用无线通信技术简介[J].电脑知识与技术,2008,8(5):1062-1064.
    [3]吕晶晶,刘国鹏,姚金杰.基于无线传感器网络的地震监测系统设计[J].传感器世界,2011,17(7):29-32.
    [4]张松林.单片机按键防抖方法的浅析[J].科技创新导报,2010,(26):56.
    [5]曾昭健,毛韬,朱善安,等.串行引导加载技术在DSP网络实验系统中的应用[J].机电工程,2007,24(8):17-19.
    [6]陶维青,任谦.通过串口通讯实现TMS320F2812的软件更新[J].合肥工业大学学报,2008,31(4):569-571.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心