燃煤锅炉飞灰可燃物质量分数偏高的原因分析及对策
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
电厂来煤复杂多变、燃煤品质严重偏离设计值,导致锅炉飞灰可燃物质量分数居高不下。采取规范燃煤掺配管理、根据不同煤种调整HT-NR3型旋流煤粉燃烧器配风和限制无烟煤一次风速等措施后,在入炉煤保持1/3无烟煤、2/3烟煤的情况下,锅炉飞灰可燃物质量分数可控制在3%左右。
The incoming coal of a power plant is complex and variable,and the quality of the incoming coal is far deviated from the designed value,which causes the mass fraction of combustibles in fly ash of the boiler to staying at a high level.Some measures were adopted,which includes to normalize the coal blending management,to adjust the air distribution of the HT-NR3 swirl pulverized coal burner according to different coal type and to control the first air speed for blind coal,and when a third of incoming coal is blind coal and two-thirds are bituminous coal,the mass fraction of combustibles in fly ash of the boiler can be controlled at about three percents.
引文
[1]高正阳,方立军叶学民,等.无烟煤与烟煤混煤燃烧性能的热重实验研究[J].华北电力大学学报,2001,28(1):39-42.
    [2]张力.电站锅炉原理[M].重庆:重庆大学出版社,2009.
    [3]王莺歌.大型电站锅炉飞灰含碳量的调整与控制[J].东北电力技术,2007(11):24-28.
    [4]路春美,王永征.煤燃烧理论与技术[M].北京:地震出版社,2001.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心