子结构修正变形法的模型动力特征分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
现在大型工程结构趋于复杂,建立完整的计算模型需要大量的工作量和存储空间,在此基础上进行有效的动力分析将非常困难。本文利用子结构方法提取通用有限元软件ANSYS建立的结构精细有限元计算模型,再用变形修正方法进行计算模型简化,在此基础上进行模态分析求解频率。通过两个算例验证了该方法的正确性及高效。
Engineering structures are becoming large and complex.The establishment of an elaborate computing model requires a lot of work and effective dynamic analysis is very difficult.In this paper,the sub-structure method combined with deformation modification is utilized to obtain reduced models of complex structures from the elaborate finite element model built by ANSYS software.Then structures' frequencies are calculated using the presented reduced model and two examples illustrate its validity and efficiency.
引文
[1]Guyan R J.Reduction of stiffness and mass matrices[Z].1965:3(2):680.
    [2]Edward J.Kuhar C V S.Dynamic Transformation Method for Mo-dal Synthesis[J].AIAA Journal,1974,12(5):672-678.
    [3]Hyungi Kim M C.Two-level scheme for selection of primary de-grees of freedom and semi-analytic sensitivity based on the re-duced system[J].Comput.Methods in Applied and Engineering.2006,195:4244-4268.
    [4]楼梦麟.结构动力分析的子结构方法[M].上海:同济大学出版社,1997.
    [5]王瑁成.有限单元法[M].北京:清华大学出版社,2004.
    [6]刘彬,丁桦,时忠民.基于柔度修正的局部刚体化结构动力模型简化方法[J].工程力学,2007,(10):25-29.
    [7]丁桦,郑淑飞.基于变形修正的局部刚体化动力模型简化方法[J].力学与实践,2008,30(6):31-34.
    [8]王文胜,徐胜利.基于简化模型的结构动力特性优化[C]∥中国力学学会学术大会.河南郑州:2009:231-239.
    [9]王文胜,徐胜利,程耿东.基于简化模型的结构动力特性优化[J].工程力学,2011,(12):45-50.
    [10]殷学纲.结构振动分析的子结构方法[M].北京:中国铁道出版社,1991.
    [11]周海亭,陈莲.子结构方法在ANSYS软件中的应用[J].噪声与振动控制,2001,(5):16-18.
    [12]马少坤,于淼,崔皓东.子结构分析的基本原理和ANSYS软件的子结构分析方法[J].广西大学学报(自然科学版),2004,(2):150-153.
    [13]赖永标,等.土木工程有限元分析典型范例[M].北京:电子工业出版社,2007.
    [14]谈臻.高耸烟囱结构在竖向和水平地震作用下的抗震性能分析[D].上海:同济大学,2007.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心