基于软件理论的光栅信号可逆计数技术研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在分析计量光栅工作原理的基础上,对光栅莫尔条纹信号的可逆计数技术进行了系统分析和研究。特别对软件辨向进行了研究,提出了基于Cohen-Sutherland编码理论的区域编码软件辨向算法,并设计了光栅信号数据处理的软件流程。在万能式齿轮测量机上实际使用结果表明,该软件计数技术能大幅度提高计数准确度,转换速度快,较基于硬件的辨向速度提高1~2倍。该算法设计灵活,可适用于长光栅和圆光栅的测量系统中。
On the basis of analyzing the working principle of the metrological grating, systematic analysis and research are conducted on the grating moiré fringe signal of reversible counting technology.Special sense to the software are studied, the region coding software based on the theory of the Cohen- Sutherland coding to the algorithm are put forward, and the grating signal data processing software process are designed. The results of using the universal type gear measuring machine show that the software counting technology can greatly improve accuracy with fast conversion-- 1to 2 times higher than the reaction rate of determining direction based on hardware. The algorithm design is flexible, which can be applied to long grating and circular grating measurement system.
引文
[1]王志远.以数据库为核心的开放式三坐标测量机控制系统的研究与开发[D].西安:西安理工大学,2000.
    [2]李淑清,诸葛晶昌,陈可,王冠雅.光栅数字地震检波器采集存储与离线分析系统的设计[J].天津科技大学学报,2006,21(03)∶49~52
    [3]何安国,喻洪麟,朱传新,王远干.光栅莫尔条纹细分及辨向方法研究[J].光电工程,2007,34(10)∶45~49
    [4]刘克非,张春林,王大勇.光栅位移传感器在凸轮廓线测量中的运用[J].传感器技术,2002,21(01)∶48~50
    [5]肖峻,赵凯,汤春球.基于8253的4通道脉冲计数系统的设计[J].机械与电子,2007,(07)∶34~36
    [6]绳红强,汪世益.基于AT89S51的数控机床光栅尺位移测量系统[J].机电工程技术,2006,35(06)∶47~49
    [7]朱昊,刘文耀,王晓东,郝永杰,梁捷.脉冲对技术在ADCP测速系统中的实现[J].计算机工程,2005,31(21)∶48~50
    [8]喻洪麟,黄良明,王远干.莫尔条纹信号的DSP滤波及细分技术研究[J].光电工程,2004,31(09)∶61~65
    [9]楚兴春,吕海宝,杜列波,周卫红.任意相位差条纹信号细分方法的研究[J].光学学报,2005,25(04)∶497~500

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心