基于功能试验的加速度传感器性能评价
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
以二阶系统的动力方程为基础,计算不同固有频率和阻尼比下的传感器功能试验响应,讨论功能试验响应随频率和阻尼比的变化,给出了依据功能试验响应确定传感器固有频率和过冲响应比的计算方法,继而统计回归得到过冲响应比随阻尼比的变化关系式。基于传感器的频率响应分析,讨论阻尼比对传感器的幅频特性和相频特性的影响,认为阻尼比在0.68-0.70范围内传感器具有最佳的幅频与相频特性。最后,以传感器自振特性确定方法及性能评价分析为基础,提出基于功能试验的力平衡式加速度传感器性能评价方法,并通过实例对典型传感器的性能进行评价。
In this paper,on the basis of the dynamic equations of the second-order system,the function test response of sensor was calculated under the condition of different natural frequency and damping ratio,and the change of the functional test response with frequency and damping ratio was discussed,and the functional test response based the analytical method for natural frequency and step pulse overshoot response ratio of the sensor,and the relationship formula between the overshoot response ratio and the damping ratio was established by statistical regression.Based on the frequency response of the sensor,the effect of the damping ratio of the sensor on its amplitude-frequency and phase-frequency characteristics was discussed.The results show that the sensor was provided with the best amplitude-frequency and phase-frequency characteristics when its damping ratio was in the range of 0.68 to 0.70.Finally,function test based performance evaluation method of force balance accelerotransducer was proposed based on the analytical method of sensor s natural frequency and damping ratio and the performance evaluation and analysis of sensor,and the performance of typical force balance accelerotransducer was evaluated by example.
引文
李彩华.力平衡加速度传感器设计分析[J].传感器技术,2005,24(8):46-48.
    李德葆,陆秋海.工程振动试验分析[M].北京:清华大学出版社,2004.
    李科杰.新编传感器技术手册[M].北京:国防工业出版社,2002。
    曲家骐,王季秩.伺服控制系统中的传感器[M].北京:机械工业出版社,1998.
    王家行,胡振荣.GZSD-1606型数字强震记录仪与分析系统的研制[J].地震地磁观测与研究,1998,19(4):67-73
    王之芳.传感器应用技术[M].西安:西北工业大学出版社,1991.
    中华人民共和国地震行业标准.数字强震动加速度仪(DB/T 10—2001)[S].北京:地震出版社,2002.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心