叠层铅芯橡胶隔震支座剪切破坏模式研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
对叠层铅芯橡胶隔震支座进行了水平剪切性能试验、极限剪切破坏试验和受拉后的水平剪切性能试验、极限剪切破坏试验,根据试验结果及现象,研究了剪切应变对隔震支座力学性能的影响、支座极限剪切破坏发展机制及受拉工况对支座极限剪切破坏模式的影响.
Shear performance test and ultimate shear failure test of laminated lead steel-plate-laminated-rubber-bearing isolation bearing were conducted in this paper,including a comparison group test considering tension effect.Research based on the tests results and phenomena,indicates that the tension experience has a major impact on shear failure model of isolation bearings.
引文
[1]日本建筑学会,隔震结构设计[M].北京:地震工程出版社,2006.
    [2]周福霖,工程结构减震控制[M].北京:地震出版社,1997.
    [3]庄学真,等,1200型大直径建筑叠层铅芯橡胶隔震支座性能研究[J].西安建筑科技大学学报:自然科学版,2008,40(3):368-375.
    [4]熊世树,周正华,王补林,铅芯橡胶隔震支座恢复力模型的分析方法[J].华中科技大学学报:城市科学版,2003,20(2):28-31.
    [5]GB20688.1-2007,橡胶支座第1部分:隔震橡胶支座试验方法[S].
    [6]GB20688.3-2006,橡胶支座第3部分:建筑隔震橡胶支座[S].

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心