单层钢框架结构振动台试验与数值模拟对比分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
基于振动台试验结果,采用有限元分析软件ETABS和时程分析法分别模拟单层钢结构模型在不同的地震波及地震加速度峰值条件下的地震反应。在相同加速度峰值的地震波作用下,模型结构的地震反应数值模拟结果与振动台模型试验实测结果吻合良好,证明本文的分析模型及方法是可行的,可作为振动台结构模型试验的辅助工具。
Base on the results of the shaking table test,this paper uses finite element analysis software of ETABS to simulate seismic response of the monolayer steel structure model with the different seismic and peak acceleration by time history analysis method.The measured results are in good agreement with the theoretical calculation,and it shows that this paper adopted the analysis model and method is feasible,it can be used as a shaking table structure model experiment analysis tool.
引文
[1]杨伟,顾明.高层建筑三维定常风场数值模拟[J].同济大学学报,2003(6)
    [2]颜学渊.钢铅组合耗能器和高层三维隔震抗倾覆系统研究[D].哈尔滨工业大学,2009
    [3]颜学渊,王焕定,张永山等.钢铅组合耗能器参数优选及减震效果[J].工程力学,2009(2)
    [4]颜学渊,王焕定,张永山等.新型钢铅组合耗能器性能试验及参数优选[J].哈尔滨工业大学学报,2009(12)
    [5]Yan Xueyuan,Zhang Yongshan,Wang Huanding.Researchon seismic performance and design method of combinedsteel lead energy dissipation structure(I)[J].Journal ofHarbin Institute of Technology(New Series),2010(3)
    [6]张敏政.地震模拟实验中相似律应用的若干问题[J].地震工程与工程振动,1997(2)
    [7]杨溥,李英民,赖明.结程时程分析法输入地震波的选择控制指标[J].土木工程学报,2000(6)
    [8]谢礼立,翟长海.最不利设计地震动研究[J].地震学报,2003(3)

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心