地震作用下岩石边坡稳定性有限元模拟
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
为研究地震作用下岩石边坡的稳定性问题,根据实验室直剪实验结果确定了完整的岩石样本的抗剪指标参数,并根据岩体裂隙间距对其进行了弱化折减.采用有限元强度折减方法评估了含节理岩石边坡的稳定性,计算了临界滑移面的安全系数.通过Drucker-Prager破坏准则判断岩石边坡有限元模型中每个单元的滑移状态.采用准静态方法模拟岩石边坡地震作用荷载,讨论地震动力放大系数对边坡抗滑稳定性安全系数的影响.基于有限元分析结果,确定不同地震作用组合下岩石边坡在极限状态下的塑性区分布和滑移面的安全系数.
In order to study the stability of rock slope under earthquake action,the shear strength parameters of intact rock specimens are determined according to direct shear test in laboratory,and the equivalent shear strength parameters of jointed rock mass are modified by multiplying a reduced factor according to joint spacing in rock slope.Shear strength reduction approach is applied to evaluate stability of jointed rock slope and calculate safety factor of sliding surface based on finite element analysis.Drucker-Prager fracture criterion is used to evaluate the sliding state of every element of finite element model for rock slope.Jointed rock slope is simplified as homogeneous materials after modifying shear strength parameters.The earthquake actions are simulated by using quasi-static method.The influences of seismic dynamic magnification coefficient on safety factor of sliding surface are discussed.The distributions of plastic zone at collapse state and safety factor of sliding surface are determined according to computing results of finite element method.
引文
[1]丁川,曹兰柱,贾兰,等.基于3Dslope的露天矿边坡稳定性计算[J].辽宁工程技术大学学报:自然科学版,2013,32(3):297-300.Ding Chuan,Cao Lanzhu,Jia Lan,et al.Slope stability calculation of open pit using 3Dslope software[J].Journal of Liaoning Technical University:Natural Science,2013,32(3):297-300.
    [2]Nian T K,Huang R Q,Wan S S,et al.Three-dimensional strengthreduction finite element analysis of slopes:geometric effects[J].Can.Geotech.J,2012,49(5):574-588.
    [3]Zhang Yingbin,Chen Guangqi,Zheng Lu.Effects of geometries on threedimensional slope stability[J].Can.Geotech.J,2013,50(3):233-249.
    [4]杨泽,侯克鹏,李克钢.云锡大屯锡矿岩体力学参数的确定[J].岩土力学,2010,31(6):1 923-1 928.Yang Ze,Hou Kepeng,Li Kegang.Determination of mechanical parameters of rock mass from Yunxi Datun Tin Mine[J].Chinese Journal of Geotechnical Engineering,2010,31(6):1 923-1 928.
    [5]王三建.岩体剪切强度特性及强度折减方法研究[J].山西建筑,2008,34(17):117-118.Wang Sanjian.Research on the property of rock shearing strength and strength reduction method[J].Shanxi Architecture,2008,34(17):117-118.
    [6]刘业科,曹平,汪亦显.岩体物理力学参数测定及其工程处理方法的研究[J].南华大学学报,2009,23(1):31-15.Liu Yeke,Cao Ping,Wang Yixian.Study on determination and engineering treatment method of rock mass mechanical parameters[J].Journal of University of South China,2009,23(1):31-15.
    [7]Hoek E,Brown E T.Practical Estimates of Rock Mass Strength[J].International Journal of Rock Mechanics&Mining Sciences,1997,34(8):1 165-1 186.
    [8]Griffiths D V,Lane P A.Slope stability analysis by finite elements[J].Geotechnique,1999,49(3):387-403.
    [9]Cheng Y M,Lansivaara T,Wei W B.Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods[J].Computers and Geotechnics,2007,34(3):137-150.
    [10]Luc Scholtes,Frederic-Victor Donze.Modelling progressive failure in fractured rock masses using a 3D discrete element method[J].International Journal of Rock Mechanics&Mining Sciences,2012,52(Complete):18-30.
    [11]Wang Xiaogang,Zhao Yufei,Lin Xingchao.Determination of mechanical parameters for jointed rock masses[J].Journal of Rock Mechanics and Geotechnical Engineering,2011,3(S):398-406.
    [12]罗勇,龚晓南.节理发育反倾边坡破坏机理分析及模拟[J].辽宁工程技术大学学报:自然科学版,2011,30(1):60-63.Luo Yong,Gong Xiaonan.Mechanism analysis and simulation on damage of antidi slope with well-developed joints[J].Journal of Liaoning Technical University:Natural Science,2011,30(1):60-63
    [13]赵尚毅,郑颖人,张玉芳.极限分析有限元法讲座-Ⅱ有限元强度折减法中边坡失稳的判据探讨[J].岩土力学,2005,26(2):332-336.Zhao Shangyi,Zheng Yingren,Zhang Yufang.Study on slope failure criterion in strength reduction finite element method[J].Chinese Journal of Geotechnical Engineering,2005,26(2):332-336.
    [14]裴利剑,屈本宁,钱闪光.有限元强度折减法边坡失稳判据的统一性[J].岩土力学,2010,31(10):3 337-3 341.Pei Lijian,Qu Benning,Qian Shanguang.Uniformity of slope instability criteria of strength reduction with FEM[J].Chinese Journal of Geotechnical Engineering,2010,31(10):3 337-3 341

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心