海上地震探测传输系统的设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用流水线逐级上传的方法解决了电缆外部需要大量缓存的问题,采用基于LVDS(Low Voltage Differential Signaling)和双绞线的传输方式,实现了100m长度下160Mb/s的稳定传输,克服了传统系统中用光纤传输时不易维护的不足。系统在满足高速率传输的同时,具有成本低、使用方便、安装容易、体积小等优点,使电缆传输成功应用于海上地震数据传输系统。
The system employed pipeline method uploading data board-by-board to eliminate the demand of buffer storage off-cable.Moreover,the transmission method based on LVDS and twisted-pair was used in the system,which overcame the shortcoming of traditional system which use fiber as the transmission medium and carried out stable transmission at 160 Mb/s in 100 meters distance.The system not only satisfied the requirement of high-speed transmission,but had a lot of strong points,such as low-cost,easy to use and install,and space-saving,all of which made cable transmission successfully apply to marine seismic data transmission system.
引文
[1]曾翔,宋克柱,唐世悦.基于光纤的多级数据采集传输系统设计[J].光纤与电缆及其应用技术,2005(6):29-31.
    [2]曾翔.地震拖缆多级数据传输系统[D].安徽:中国科学技术大学,2006.
    [3]彭勇,黄秋元.LVDS的接口电路设计[J].武汉理工大学学报.信息与管理工程版,2005(10):189-192.
    [4]Stephen Kempaimen.Low Voltage Differential Signaling[J].Insight,2005(2):15-20.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心