现有风力发电机组地震作用计算方法对5MW风力发电机组的适用性研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
基于一台5 MW风力发电机组的实际数据,采用我国地震反应谱,进行有限元反应谱分析。并分别采用日本风电规范、IEC标准及相关文献的计算方法对该5 MW风力发电机组塔架剪力、弯矩进行计算,通过与有限元计算结果对比,分析各公式的适用性,可为我国地震环境下的风力发电机组抗震计算提供有益参考。
Based on a 5 MW wind turbine,the finite element response spectrum analysis according to Chinese response spectrum was carried out.Japanese wind turbine specification,the IEC standard and the method of corresponding paper were used to calculate the tower shear and moment.By comparison with the finite element method,the applicability of these methods was analyzed,which can provide a useful reference for the seismic calculation of wind turbines in China.
引文
[1]日本土木学会.风力发电设备支持物构造设计指针同解说[S],2010.
    [2]IEC 61400—1.Wind turbines,Part 1:Design requirements[S].International Electro technical Commission,2003.
    [3]Zhu Lei,Wang Yuanqing,Shi Yongjiu.Seismic load analysis of wind turbines by response spectrum approach[A].2011 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring(CDCIEM)[C],Changsha,China,2010,1706—1709.
    [4]Jonkman J,Butterfield S,Musial W.Definition of a 5 MW reference wind turbine for offshore system development[R].U.S.Department of Energy Office of Scientific and Technical Information,2009.
    [5]GB 50011—2010,中国建筑工业出版社[S].
    [6]GB 50051—2002,烟台设计规范[S].
    [7]祝磊,石原孟.日本《风力发电设备支持物构造设计指针及解说》(2010)简介[J].特种结构,2011,(12):17—19.[7]Zhu Lei,Ishihara Takeshi.Summary of guidelines for design of wind turbine support structures and foundations(2010)in Japan[J].Special Structures,2011,(12):17-19.
    [8]祝磊.风电机组结构抗震研究现状[J].风能,2010,(4):58-59.[8]Zhu Lei.Present seismic research for the structure of wind turbines[J].Wind Energy,2010,(4):58-59.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心