地震模拟振动台三参量控制技术的研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对电液伺服振动台单纯的以位移控制为基础存在着使用频率狭窄和系统阻尼小的缺陷而不能很好地实现波形复现的问题,本文根据地震模拟振动台振动控制系统的工作性能,在对液压系统进行一定线性化处理的基础之上,搭建了系统的数学模型。在单纯位移控制的基础上,增加了加速度和速度环节设计三参量控制器,分别用PID控制和三参量控制的方法对电液振动台进行仿真研究,比较了PID控制和三参量控制的优缺点。仿真结果表明,三参量的方法能有效地增大系统阻尼防止共振破坏,增强了系统的稳定性。
It is difficult to finish the reproduction of earthquake wave when the frequency is narrow and damping is small by using simple displacement control.In this study we use PID and TVC control to obtain the simulation of shaking table test which based on the mathematical model of system and its components with a linearization process.By comparison of the difference of PID and TVC control,we find that the result of simulation with the TVC control can increase the system damping,prevent the resonance damage and thus improve the stability.
引文
方重,1999.模拟地震振动台的近况及其发展.世界地震工程,15(2):89—91.
    关广峰,2007.液压驱动六自由度振动试验系统控制策略研究.哈尔滨:哈尔滨工业大学.
    黄茹楠,2009.电液振动台的模糊PID研究.液压与气动,(4):36—38.
    黄浩华,2008.地震模拟振动台的设计与应用技术.北京:地震出版社,57—76.
    贾丽华,2006.电液伺服地震模拟振动台控制算法的研究.北京:北京交通大学.
    李振宝,2010.地震模拟振动台三参量控制算法超调修正.振动与冲击,10(29):211—215.
    李敏霞,1997.伺服振动台的振动控制技术及应用振动.测试与诊断,9(17):23—26.
    周惠蒙,2007.基于迭代学习控制的电液伺服振动台控制系统的研究.湖南:湖南大学.
    Ammanagi S.,Poornima V.,Sera A.et al.,2006.Development of a digitally three-axis earthquake shake table.Current Science,91(2):190—203.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心