共炮检点叠加最大能量剩余静校正的应用研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
黄土塬地震资料具有低信噪比、静校正比较突出等问题。在应用静校正方法后记录的剩余静校正量依然较大,针对这个问题,提出了分别计算炮点和检波点剩余静校正量的共地面剩余静校正方法。实际数据的测试表明,这种方法可以解决低信噪比资料的较大剩余静校正问题。
The seismic data of Loess Plateau is characterized with low signal/noise ratio,relatively prominent static correction and other features.Despite the application of static correction method,the recorded residual static correction is still large.Against the problem,this paper proposed commom ground residual static correction method by calculating the residual static correction of com mon-shot and geophone interval respectively.Actual test data proved that this method could solve the problem of relatively large re sidual static correction of the data with low signal/noise ratio.
引文
[1]熊翥.复杂地区地震数据处理[M].北京:石油工业出版社,2002:129.
    [2]国九英,周兴元,李少英.二阶差分最大叠加能量法地表一致性静校正[J].石油地球物理勘探,1992,27(3):361-370.
    [3]唐建侯,张金山.消除P-SV波大静校正量的方法[J].石油地球物理勘探,1994,29(5):650-653.
    [4]谭昌勇,王彦春,张伟宏,等.静校正方法在黄土塬地区的联合应用[J].石油物探,2009,48(3):252-257.
    [5]赵锋,郑鸿明,郭洪宪,等.层析反演静校正技术及应用效果分析[J].新疆石油地质,2002,23(5):397-399.
    [6]张红,袁春艳.中东某复杂地表区静校正方法及应用[J].中国科技信息,2010,23(21):18-19.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心