岩石超声检测信号初至的AIC自动拾取方法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
岩石超声检测中最重要的一个环节是初至的拾取,然而该项工作往往费时费力,拾取精度受人为因素影响较大。为提高声波速度检测、声发射定位、以及超声层析成像的应用效率和精度,本研究将地震学中应用比较广泛的AIC初至自动提取技术引入到岩石超声检测中,并进行了适当改进。利用改进前后的AIC方法,自动拾取仿真信号和实际信号的初至,并利用长短时窗比方法(STA/LTA)和手动方法拾取了初至,同时分别与设定的实际初至进行对比。根据实验结果,对于信噪比较低的信号AIC方法要优于STA/LTA方法;改进前的AIC方法适用于起跳干脆、幅度变化大的信号,而改进后的AIC方法则适用于起跳较平缓的信号,且拾取到的初至与手动拾取的初至更加接近。
The onset time picking is one of the most important procedures of ultrasound testing of rock, which is always a time-consuming effort. The picking precision is easily influenced by artificial factors. To improve the accuracy and the efficiency of acoustic velocity measurement of rock, the location of acoustic emission and ultrasonic tomography, the technique of AIC for automatic onset time picking, widely used in seismology, is introduced to the ultrasound testing of rock and is improved appropriately. In this paper, the onsets of simulated and actual signals are picked with AIC and improved AIC, respectively; and all the picking results are compared with the actual arrival time(just for simulated signals) and onset time picked by artificial and STA/LTA method. According to the experiment results, the AIC is superior to the STA/LTA method, for signals with low SNR; the AIC works better for signals with sharp onset and fast amplitude variation, and improved AIC is more suitable for signals with gentle onsets to pick the first arrivals; and the picking results of the latter are closer to the artificial results than the former.
引文
[1]王彩霞,白超英,王馨.地震震相初至自动检测技术综述[J].地球物理学进展,2013,28(5):2363-2375.Wang CX,Bai CY,Wang X.Review of automatic onset time picking for seismic arrivals[J].Progress in Geophsics,2013,28(5):2363-2375.(in Chinese).
    [2]Kurz JH,Grosse CU,Reinhardt HW.Strategies for reliable automatic onset time picking of acoustic emissions and of ultrasound signals in concrete[J].Ultrasonics,2005,43(7):538-546.
    [3]Leonard M.Comparison of manual and automatic onset time picking[J].Bulletin of the Seismological Society of America,2000,90(6):1384-1390.
    [4]Zhang H,Thurber C,Rowe C.Automatic P-wave arrival detection and picking with multiscale wavelet analysis for single-component recordings[J].Bulletin of the Seismological Society of America,2003,93(5):1904-1912.
    [5]Akazawa T.A technique for automatic detection of onset time of P-and S-phases in strong motion records[C]//13th World Conference on Earthquake Engineering,2004,(786).
    [6]Wong J,Han LJ,Bancroft JC,et al.Automatic time-picking of first arrivals on noisy microseismic data[C]//Canadian Society of Exploration Geophysicists Conference Abstract,2009:1-5.
    [7]高淑芳,李山有,武东坡,等.一种改进的STA/LTA震相自动识别方法[J].世界地震工程,2008:24(2):37-41.Gao SF,Li SY,Wu DP,et.al,An automatic identification method of seismic phase based on modified STA/LTA algorithm[J].World Earthquake Engineering,2008,24(2):37-41.(in Chinese).
    [8]叶根喜,姜福兴,杨淑华.时窗能量特征法拾取微地震波初始到时的可行性研究[J].地球物理学报,2008,51(5):1574-1581.Ye GX,Jiang FX,Yang SH.Possibility of automatically picking first arrival of microseismic wave by energy eigenvalue method[J].Chinese Journal of Geophysics,2008,51(5):1574-1581.(in Chinese).
    [9]宋维琪,喻志超,杨勤勇,等.低信噪比微地震事件初至拾取方法研究[J].石油物探,2013,52(6):596-608.Song WQ,Yu ZC,Yang QY,et al.The first arrival picking method of microseismic events with low S/N[J].Geophysical Prospecting for Petroleum,2013,52(6):596-608.(in Chinese).
    [10]Herold C,Leibfried T,Markalous S,et al.Algorithms for automated arrival time estimation of partial discharge signals in power cables[C]//15th International Symposium on High Voltage Engineering,2007,T7-332:1-5.
    [11]余建华,李丹丹,韩国栋.特征函数响应特性分析及STA/LTA方法的改进[J].国外电子测量技术,2011,30(7):17-19.Yu JH,Li DD,Han GD.Response analysis of the characteristic function and STA/LTA method improving[J].Foreign Electronic Measurement Technology,2011,30(7):17-19.(in Chinese).

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心