Viterbi译码算法在GMSK系统中的性能分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
通过研究译码软、硬判决实现理论,比较在GMSK系统中两种判决对误码率的差别,在Simulink中设计基于GMSK调制方式、卷积编码、软判决与硬判决译码相对比的通信仿真系统,分析不同信噪比对误码率的影响。仿真结果证明了所建立系统的正确性,说明使用GMSK调制方式,在误码率为10~(-3)—10~(-2)区间内,使用软判决要比硬判决译码提升信噪比约3 dB。因此,数传电台采用Viterbi译码是保证地震信号传输质量的有效方法。
GMSK modulation and Viterbi decoding are generally applied in the CDDM-1A data radio used to transmit seismic data.Viterbi decoding is a maximum likelihood decode algorithm, the complexity of which is independent of channel quality.GMSK is a widely applied modulation mode in radio systems.By studying the implementation theory of the software and hardware decision algorithms of the Viterbi decoding,and comparing the error rates of the two decisions in the GMSK system,this paper establishes a complete communication simulation system based on GMSK modulation,convolutional code and comparing of the software and hardware decision algorithms of the Viterbi decoder in the Simulink,to analyze the impact of different SNRs on error rates.The simulation results prove the validity of the system established,and demonstrate that using GMSK modulation,at error rates ranging from 10~(-3) to 10~(-2),the software decision improves SNR by 3 dB than that of the hardware decision. Therefore,Viterbi decoding can be used by the radio system to ensure the transmission quality of seismic data.
引文
蒋卓勤,刘剑锋,盛小平,等.软判决维特比译码算法的Simulink仿真实现[J].系统仿真技术,2008,1:10-13.
    娄莉.GMSK数字调制的仿真与分析[J].现代电子技术,2004,18:66 68.
    王立宁,乐光新,詹菲.MATLAB与通信仿真[M].北京:人民邮电出版社,2000.
    王新梅,肖国镇.纠错码原理与方法[M].西安电子科技大学出版社,2001.
    杨辉媛,李云红,涂成军.QAM调制技术及其MATLAB仿真[J].微计算机信息,2010,5(1):181-183.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心