基于二分法的地震波初至自动拾取算法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
初至拾取是地震资料处理中最基本的环节,随着地震资料的增多,自动拾取算法越来越重要,它将严重的影响地震资料处理的速度和效率.本文给出一种新的初至自动拾取算法,它根据参考初至(理论估计的初至),利用二分法和改进的能量比方法检测初至并去除不准确点,通过微调获取波峰、波谷、起跳点三种不同的初至类型.通过对不同信噪比的实际地震数据进行测试,本算法具有快速准确的特点.随着资料信噪比的降低,本算法未能完全解决拾取准确度降低的问题.然而通过适当调整算法的参数,本算法的结果比商用软件OMEGA的初至自动拾取效果要好.
First break picking is the most basic part in seismicdata processing.The automatic picking algorithm of first arrivals is becoming more and more important as the increasing data in seismic exploration,and it will affect the speed and efficiency of the whole seismic data processing seriously.On the one hand,the time of the first breaks is used in velocity measurements ranging from elementary refraction profiling to the most sophisticated tomographic inversions of first arrivals.On the other hand,the artificial first break picking is very labor-intensive and time-consuming.For these facts,based on the first-breaks available for reference(or theoretical estimated first-breaks),a new algorithm is proposed for the automatic picking of first breaks,which includes three different picking forms—peak,trough,takeoff.The picking techniques are based on the facts that the dichotomy can be used to determine the picking scopes rapidly and the transition between noise and noise plus signal can be automatically identified by detecting rapid changes in improved energy ratio.A skill to remove the inaccurate first breaks depends on the available for reference as mentioned before.Furthermore,the algorithm has been tested on real data sets with varying S/N ratios.As we expected,the picking results were got quickly and accurately.Meanwhile,this algorithm cannot solve the problem that the picking results are not so good with the low S/N ratios.However,with an appropriate tuning of its parameters,this algorithm proved more accurate than commercial software OMEGA.
引文
Peraldi R,Climent A.1972.Digital processing of refraction data:Study of first arrivals[J].Geophysical Prospecting,20:529-548.
    Hatherly P.1982.A computer method for determining seismic first arrival times[J].Geophysics,47:1431-1436.
    Gelchinsky B.Shtivelman V.1983.Automatic picking of first arrivals and parameterization of traveltime curves[J].Geophysical Prospecting,31:915-928.
    Coppens F.1985.First arrivals picking on common-offset trace collections for automatic estimation of static corrections[J].Geophysical Prospecting,33:1212-1231.
    Murat M,Rudman A.1992.Automated first arrivals picking:A neural network approach[J].Geophysical Prospecting,40:587-604.
    Yung S,Ikelle L.1997.An example of seismic time picking by thirdorder bicoherence[J].Geophysics,62:1947-1951.
    Jiao L,Moon W.2000.Detection of seismic refraction signals using a variance fractal dimension technique[J].Geophysics,65:286-292.
    Liu Y K,Chang X,Wang H.2001.Estimation of near-surface velocity and seismic tomographic static corrections[J].Chinese J.Geophys.(in Chinese),44(02):272-278.
    Tibuleac 1,Herrin E,Britton J,et al.2003.Automatic secondary seismic phase picking using wavelet transform[C].Proceedings of the 25~(th)Seismic Research Review,Nuclear Explosion Monitoring:Building the Knowledge Base,Session 3-04,352-359.
    Zhang H J,Thurber C,Rowe C.2003.Automatic P-Wave arrival detection and picking with multiscale wavelet analysis for singlecomponent recordings[J].Bulletin of the Seismological Society of America,93(5):1904-1912.
    Chen Z,Stewart R.2005.Multi-window algorithm for detecting seismic first arrivals[A].2005 CSEG National Convention,355-358.
    Wong J,Han L,Stewart R R,et al.2009.Geophysical well logs from a shallow test well and automatic time-picking on full-waveform sonic logs[J].CSEG Recorder,34(4):20-29.
    Sabbione J,Velis D.2010.Automatic first-breaks picking:New strategies and algorithms[J]Geophysics,75(4):67-74.
    Qin Y L,Zhang Z J,Shin Changsoo,et al.2005.First arrival traveltime and amplitude calculation from monochromatic two way wave equation in frequency domain[J].Chinese J.Geophys.(in Chinese),48(2):423-428.
    Zhan Y.Tang X R,Zhong B S.2005.Preprocessing of picking first arrival in complex situation[J].Geophysical prospecting for petroleum,44(2):160-162.
    Pan S L,Gao L,Zhou X X,et al.2006.Automatic method of first break picking based on edge detection and spline interpolation[J].Geophysical prospecting for petroleum,45(3):245-249.
    Liu Z C.2007.First break intelligent picking technique[J].Geophysical prospecting for petroleum,46(4):521-530.
    Li H,Dai X CGe H K,et al.2007.Seismic signal detection and first arrival pickup based on mutual information[J].Chinese J.Geophys.(in Chinese),50(4).1190-1197.
    Zhang W,Wang Y C,Li H C,et al.2009.Seismic first arrival pickup using instantaneous intensity ratio[J].Progress in Geophys.(in Chinese),24(1),201-204.
    Ni D Y,Zu Y F,Li H X,etal.2010.The first arrival time picking up method for vibro-seis seismic datasets[J].Oil Geophysical Prospecting,45(6):793-796.
    Xu Y,Duan W X,Xu W X,et al.2010.The improvement of automatic first break picking based on energy ratio[J].Geophysical&Geochemical exploration,34(5):595-599.
    Zhang Y P,Liang C,Wu W J.2010.Energy ratio method seismic wave first break picking-up system designing based on QT developing platform[J].Oil Geophysical Prospecting,45(1):156-159.
    Cheng Z P.Chen Y P,He C Q.2011.A method of first break picking in seismic data constrained by space-varied time window[J].Progress in Geophys.(in Chinese),26(5):1626-1631.
    Pan J,Liu B H,Hua Q F,et al.2012.Forward modeling based on OBS and first break recognition research[J].Progress in Geophys.(in Chinese),27(6):2437-2443.
    Jiang G M,Zhang G B,Xu Y.2012.A fast method for calculating relative residuals of teleseismic data and its application[J].Chinese J.Geophys.(in Chinese),55(12):4097-4105.
    Liu J S,Wang Y,Yao Z X.2013.On micro-seismic first arrival identification:a case study[J].Chinese J.Geophys.(in Chinese),56(5):1660-1666.
    Zhang H L,Zhu G M,Wang Y H.2013.Automatic microseismic event detection and picking method[J].Geophysical&Geochemical exploration,37(3):269-273.
    刘伊克,常旭,王辉.2001.三维复杂地形近地表速度估算及地震层析静校正[J].地球物理学报,44(02):272-278.
    秦义龙,张中杰,Changsoo S,等.2005.利用单频双程波动方程计算初至走时及其振幅[J].地球物理学报,48(2):423-428.
    詹毅,唐湘蓉,钟本善.2005.初至拾取预处理[J].石油物探,44(2):160-162.
    潘树林,高磊,周熙襄,等.2006.基于单道边界检测和样条插值的初至波自动拾取[J].石油物探,45(3):245-249.
    刘志成.2007.初至智能拾取技术[J].石油物探,46(5):521-530.
    李辉,戴旭初,葛洪魁,等.2007.基于互信息量的地震信号检测和初至提取方法[J].地球物理学报,50(4):1190-1197.
    张伟,王彦春,李洪臣,等.2009.地震道瞬时强度比法拾取初至波[J].地球物理学进展,24(1):201-204.
    倪宇东,祖云飞,李海翔,等.2010.可控震源地震数据初至时间拾取方法[J].石油地球物理勘探,45(6):793-796.
    徐钰,段卫星,徐维秀,等.2010.高精度初至自动拾取综合方法研究[J].物探与化探,34(5):595-599.
    张元鹏,梁晨,吴文佳.2010.基于QT的能量比法地震波出资拾取系统设计[J].石油地球物理勘探,45(1):156-159.
    程仲平,陈鹰鹏,何超群.2011.空变时窗约束地震波初至的拾取方法[J].地球物理学进展,26(5):1626-1631.
    潘军,刘保华.华清峰.等.2012.基于OKS的正演模拟与初至识别研究[J].地球物理学进展,27(6):2437-2443.
    江国明,张贵宾,徐蛲.2012.远震相对走时数据快速计算方法及应用[J].地球物理学报,55(12):4097-4105.
    刘劲松,王赟,姚振兴.2013.微地震信号到时自动拾取方法[J].地球物理学报,56(5):1660-1666.
    张唤兰,朱光明,王云宏.2013.基于时窗能量比和AIC的两步法微地震初至自动拾取[J].物探与化探,37(3):269-273.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心