一种低成本无缆地震仪采集站的研制
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
随着电子技术的发展,许多新技术被应用到地球物理仪器之中.其中,无缆地震仪采集站具有重量轻、易搬运的特点,适宜应用于如森林、沼泽、沙漠等地面状况复杂的区域,可以在复杂地质条件下方便地进行地震数据采集,是未来地震仪发展的方向.本研究研发了一种低成本无缆地震仪采集站,通过分析无缆地震仪的发展方向,确定了采集站的设计方案,该系统采用了微功耗设计,GPS授时同步与低成本晶振相结合的时钟机制,并设计了基于多项分解的软件滤波器提高24位Σ-ΔADC的动态范围,其低成本、小体积、低功耗的特点使其非常适用于复杂区域下的资源勘探,并可应用于高密度、宽方位等物探新技术当中.
As the development of electronic technology,lots of new technologies are introduced into geophysical exploration.Non-cable seismic acquisition station with lightweight,portable characteristic is suitable to work at forest,swamp,desert and other extremely complex area.The Non-cable seismic acquisition station allows workers to acquire seismic data easily.It represents future development trend of geophysical instruments.A low cost Non-cable seismic acquisition station is developed;the system of Non-cable seismic acquisition station is composed with GPS time service system,storage unit,data acquisition unit etc.The article emphasizes on the design thought,working principle and implementation method of high precision analog-digital conversion,low noise acquisition channel,time service system and low cost storage,introduces the design of correlative hardware circuit and software flowchart.It adopts electronics technologies like Low-power design,the precise timing service combined of GPS receiver and inexpensive crystal,low noise acquisition channel with 24-bit Delta-Sigma A/D converters and polyphase decomposition filter.By analyzing the principle of software control system and the function requirement for data acquisition,the hardware platform design method of seismic acquisition station based on the LPC2103 MCU is given;we present a hardware designation based on ARM7 unit.By analyzing the noise source of amplifying circuit,and comparing the performance of several operational amplifiers,MAX4252 is adopted in this design.To improve the precision of analog-digital conversion,this paper discusses how to design apolyphase decomposition software filter.Further,methods of the low power consumption instrument designing is discussed and the paper puts forward the conception and designing measure of ultra-low power consumption instrument.To verify the rationality and feasibility of the design,simulation and test about the station has been done.We test the data consistency between 20 stations.With experimental verification,the seismic acquisition station has excellent performance of high precision and low power consumption.With the advantage of low cost,small size and low power consumption,it can be applied to high-density,wide azimuth and other new geophysical technologies.
引文
Chen Z B,Teng J W,Lin J,et al.2006.Design of BSR_2broadband seismic recorder.Chinese J.Geophys.(in Chinese),49(5):1475-1481.
    Du G R.2003.Electro-Magnetic Interference and Its Control(inChinese).Beijing:Publishing House of Electronics Industry,1-320.
    Dong S T,Gao H X.2005.Seismic exploration technology of singlepoint with one geophone.Petroleum Instruments(in Chinese),19(2):66-68.
    Gan Z Q.2012.Analysis and application of performance of FireFlywireless instrument.Equipment for Geophysical Prospecting(in Chinese),22(1):37-40.
    Luo F L.2005.An overview of the technology development onseismic prospecting instruments.Petroleum Instruments(inChinese),19(2):1-5.
    Li Z H,Huang J S.2005.GPS Surveying and Data Processing(inChinese).Wuhan:Wuhan University Publishing House,1-360.
    Kim N S,Austin T,Baauw D,et al.2003.Leakage current:Moore′s law meets static power.Computer,36(12):68-75.
    Wang C T,Yan Z W,Zhao Z.2010.Features and prospects of thecableless seismic acquisition system.Petroleum Instruments(in Chinese),24(5):1-3.
    Wu T J.2011.Node digital seismographs data acquisition system.Petroleum Instruments(in Chinese),25(1):51-53.
    Xie H X,Sun Z X.2012.The realization of polyphase decimationfilter on FPGA.Chinese Journal of Electron Devices(inChinese),35(3):331-333.
    Yi B J,Jiang G,Gao H.2010.Development and reflection onseismic data acquisition system.Oil Forum(in Chinese),1(2):29-34.
    Yang H Y,Han L G,Chen Z B,et al.2009a.Low powerconsumption design of Non-cable telemetric seismic datacollecting station.Instrument Technique and Sensor(in Chinese),46(1):49-53,63.
    Yang H Y,Han L G,Lin J,et al.2009b.Synchronous acquisitiontechnology in network of lineless telemetric seismic instrument.Instrument Technique and Sensor(in Chinese),(3):15-18.
    Zhao L G,Xie G S,Wang X M,et al.2005.Implement ofgeometry establishment module in seismic exploration software system.Progress Geophysics(in Chinese),20(3):729-734,doi:10.3969/j.issn.1004-2903.2005.03.025.
    Zhang J H,Zheng X G,Wang W,et al.2007.New progress ofseismic acquisition technology.Computing Techniques forGeophysical and Geochemical Exploration(in Chinese),29(5):373-381.
    陈祖斌,滕杰文,林君等.2006.BSR_2宽频带地震记录仪的研制.地球物理学报,49(5):1475-1481.
    杜国荣.2003.电磁干扰及控制.北京:电子工业出版社,1-320.
    董世泰,高红霞.2005.单点单检波器地震勘探技术.石油仪器,19(2):66-68.
    甘志强.2012.FireFly无线仪器性能分析与应用探讨.物探装备,22(1):37-40.
    罗福龙.2005.地震勘探仪器技术发展综述.石油仪器,19(2):1-5.
    李征航,黄劲松.2005.GPS测量与数据处理.武汉:武汉大学出版社,1-360.
    王春田,闫志武,赵忠.2010.新型无缆采集系统功能特点及发展前景.石油仪器,24(5):1-3.
    吴铁军.2011.节点数据采集系统数字地震仪.石油仪器,25(1):51-53.
    谢海霞,孙志雄.2012.多相抽取滤波器的FPGA实现.电子器件,35(3):331-333.
    易碧金,姜耕,高华.2010.地震数据采集记录系统的发展与思考.石油科技论坛,1(2):29-34.
    杨泓渊,韩立国,陈祖斌等.2009a.无缆遥测地震仪采集站的低功耗设计.电测与仪表,46(1):49-53,63.
    杨泓渊,韩立国,林君等.2009b.无缆遥测地震仪网络同步采样技术.仪表技术与传感器,(3):15-18.
    赵连功,谢桂生,王秀闽等.2005.地震勘探观测系统定义模块的实现.地球物理学进,20(3):729-734,doi:10.3969/j.issn.1004-2903.2005.03.025.
    张军华,郑旭刚,王伟等.2007.地震采集技术新进展.物探化探计算技术,29(5):373-381.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心