无粘结预应力混凝土结构在桥梁工程中的应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
总结国内外关于无粘结预应力筋的极限应力的研究现状,针对我国行业标准《无粘结预应力混凝土结构技术规程》中对无粘结预应力筋的极限应力设计取值规定的不足,根据大量的试验数据,提出适用于桥梁工程的无粘结预应力混凝土上部结构多种截面形式无粘结筋极限应力增量的实用简化计算方法。
It presents the state of the reinforcing ultimate stress researches at rome and abroad.According to the shortcoming in the present code,based on the test result,a reinforcing ultimate stress formula for various cross-section in the bridge construction is established.Compared,the suggested formulas are verified with the experinented results and are simply into practice.
引文
[1]陶学康.无粘结预应力混凝土结构设计与施工[M].北京:地震出版社,1993.
    [2]王丽荣.无粘结预应力混凝土简支梁的极限强度分析及试验研究[D].哈尔滨:哈尔滨工业大学,2001.
    [3]P.R.Chakarabarti.Ultimate stress for post-tensioning inpartially prestressed beams[J].ACI structrual journal,1995,92(6):689-697.
    [4]ACI318-83,美国钢筋混凝土房屋结构规范[S].
    [5]王永平.公路无粘结预应力混凝土技术应用研究课题试验研究报告[R].哈尔滨:哈尔滨工业大学交通科学与工程学院,1998:6-34.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心