弹性通舱管件的工艺性能分析

详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文

英文篇名：Analysis of Technology Property for Pipe Element Passing through Bulkhead with Elasticity 中文刊名：船舶工程 英文刊名：Ship Engineering 作者：尹喜庆 ; 金翔 ; 刘土光 ; 靖红顺 英文作者：YIN Xi-qing1 ; JIN Xiang2 ; LIU Tu-guang3 ; JIN Hong-shun2 (1.Military Representative Office in Wuhan 438 Company ; Wuhan 430060 ; China ; 2.Wuchang Shipbuilding ; Industry Co. ; Ltd ; .Wuhan 430060 ; China ; 3.Huazhong University of Science and Technology ; Wuhan 430074 ; China) 中文关键词：通舱管件 ; 工艺参数 ; 安装偏差 ; 隔振性能 英文关键词：pipe element passing through the bulkhead ; technology parameter ; deviations in the mounting ; vibration isolation 出版日期：2010-09-15 机构：海军驻武汉438厂军事代表室;武昌船舶重工有限责任公司;华中科技大学; 年：2010 期：S2 出版单位：船舶工程

摘要

为了实现弹性通舱管件的上船安装,在对其进行静变形分析、密封性试验、过流件的液压强度试验、200万次疲劳性能试验以及隔振性能台架试验基础上,对其进一步开展了弹性通舱管件制作的工艺性能和安装偏差对隔振性能的影响研究.通过工艺性能研究,制订了橡胶块的硫化制作工艺流程和硫化工艺参数,并对制作环境提出了要求;同时对弹性通舱管件安装偏差下,在激励频率为0Hz～500Hz范围的隔振性能作了仿真分析,发现在轴向位移为3mm时和倾斜角为7o时,对插入损失影响很小,其隔振性能良好.
In order to a pipe element passing through the bulkhead with elasticity can mount in a ship, it is studied that influence for vibration isolations be produced by the technology parameters and deviations in the mounting.The technological process, the technology parameters on vulcanized rubber and the requirement for the manufacture site worked.The vibration isolation of a pipe element passing through the bulkhead with elasticity for excitation frequency within 0Hz～500Hz, it is with deviations in the mounting, is analyzed by FEM.The results indicate that the influence for the insert loss is small, while the axial displacement is 3mm and the slope angle is 7o, thereof vibration isolation of a pipe element passing through the bulkhead with elasticity is very good.

引文

[1]金翔.中国国防科学技术报告——弹性通舱管件的研制[R].武昌船舶重工有限责任公司,2009.
    [2]刘锦春,姜尚奇,陈忠海,等.橡胶与金属粘接性能的影响因素[J].粘接,2003,24(5):10-12.
    [3]颜录科,寇开昌,哈恩华.氟橡胶与金属粘接用新型环氧树脂胶粘剂[J].高分子材料科学与工程,2008,24(3):145-147.
    [4][日]户川隼人著.振动分析的有限元法[M].殷荫龙,陈学源,译.北京:地震出版社,1985.
    [5]赵玫,周海亭.机械振动与噪声学[M].北京:科学出版社,2005.