波形钢腹板箱梁剪切屈曲特性

英文篇名：Shear Buckling Property of Box Girder with Corrugated Steel Webs
中文刊名：河南科技大学学报(自然科学版)
英文刊名：Journal of Henan University of Science & Technology(Natural Science)
作者：吕梁 ; 梁斌 ; 徐红玉 ; 赵锐
英文作者：L Liang ; LIANG Bin ; XU Hongyu ; ZHAO Rui ; Civil Engineering School ; Henan University of Science& Technology ; The First Subsidiary of China Railway 15th Construction Bureau Group Corporation
中文关键词：波形钢腹板箱梁 ; 临界屈曲应力 ; 有限元法 ; 屈曲理论 ; 几何参数
英文关键词：box girder with corrugated steel web ; critical buckling stress ; finite element method ; buckling theory ; geometrical parameter
出版日期：2015-06-25
机构：河南科技大学土木工程学院;中铁十五局集团有限公司一公司;
年：2015
期：03
出版单位：河南科技大学学报(自然科学版)

摘要

研究了波形钢腹板箱梁的剪切屈曲特性。基于有限元数值模拟结合相关屈曲理论的方法,计算了波形钢腹板的临界屈曲应力,并与相应理论公式计算所得的各类屈曲应力结果进行对比。同时,改变波形钢腹板的主要几何参数尺寸,研究各种几何参数对波形钢腹板箱梁剪切屈曲性能的影响。研究结果表明:波形钢腹板箱梁的临界屈曲应力与波高基本无关;波形钢腹板的直板段水平长度不应设置过大,以防止结构发生局部屈曲失稳;适当增大波形钢腹板的水平折叠角可以有效防止结构发生整体屈曲失稳;增大腹板厚度可以有效提高结构的抗屈曲性能,特别是抵抗局部屈曲失稳的能力;腹板高度过高时结构容易发生整体屈曲失稳。
Shear buckling property of box girder with corrugated steel webs was studied. Finite element method( FEM) and related theory of buckling were applied to calculate critical buckling stress of box girder with corrugated steel webs,which was compared with various buckling stress calculated from theoretical equation.The main geometrical parameter dimensions were changed to study their effect on shear buckling property of box girder with corrugated steel webs. The results show that critical buckling stress is irrelevant to the height of wave. Horizontal length of the straight section shouldn't be too long to prevent the structure from local bucklinginstability. Enlarging horizontal folding angle appropriately can prevent the structure from global buckling instability. Increasing web thickness can improve buckling resistance of the structure,especially local buckling instability resistance. Excessive height of webs can result in global buckling instability.

引文

[1]陈宝春,黄卿维.波形钢腹板PC箱梁桥应用综述[J].公路,2005(7):45-53.
    [2]朱越峰,吴朴,谢旭,等.部分波形钢腹板箱梁受力特性分析[J].浙江大学学报:工学版,2008,42(1):122-128.
    [3]Sayed-Ahmed E Y.Behavior of Steel and Composite Girders with Corrugated Steel Webs[J].Canadian,Journal of Civil Engineering,2001,28(4):656-672.
    [4]宋健永,任红伟,聂建国.波纹钢腹板剪切屈曲影响因素分析[J].公路交通科技,2005,22(11):89-92.
    [5]宋健永,张树仁,王宗林.波形钢腹板体外预应力组合梁全过程分析[J].哈尔滨工业大学学报,2003,35(5):590-593.
    [6]Driver R J,Abbas H H,Sause R.Shear Behavior of Corrugated Web Bridge Girders[J].Journal of Structural Engineering,ASCE,2006,132(2):195-203.
    [7]邱俊峰.部分波形钢腹板预应力连续组合梁受力性能分析[D].长沙:湖南大学,2013.
    [8]张阳,邱俊峰,唐重玺,等.部分波形钢腹板预应力连续组合梁性能分析[J].湖南大学学报:自然科学版,2013,40(12):14-20.
    [9]李明鸿,杨丙文,王毅力,等.波形钢腹板混凝土组合梁中波形钢板的设计方法[J].公路交通科技,2013,30(6):27-32.
    [10]宋健永,张树仁,吕建鸣.波纹钢腹板剪切屈曲分析中初始缺陷的模拟和影响程度分析[J].公路交通科技,2004,21(5):61-64.
    [11]单成林.偏载作用下组合箱梁桥波形钢腹板的屈曲[J].华南理工大学学报:自然科学版,2009,37(3):122-127.
    [12]魏俊龙.波形钢腹板箱梁斜塔无背索斜拉桥地震响应分析[J].河南科技大学学报:自然科学版,2014,35(3):64-68.
    [13]单成林.预应力混凝土组合箱梁桥波形钢腹板的屈曲分析[J].工程力学,2008,25(6):122-127.
    [14]胡华万,李俊,强士中.波形钢腹板PC组合箱梁剪切屈曲性能研究[J].铁道工程学报,2011(2):80-83.