工作状态下某巨型浮式起重机的动力稳定性分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
以巨型浮式起重机的金属结构为主要研究对象,采用动态特征值法对浮式起重机工作状态下的吊重、风和波浪载荷进行动力稳定性分析,得到六种载荷工况下的载荷比例系数和临界载荷。研究结果表明,风载荷和波浪载荷不会使浮式起重机结构发生失稳。吊重载荷的静力稳定性载荷比例系数是动力结果的3倍多,动、静力分析的结果相差较大,所以有必要对巨型浮式起重机进行动力稳定性分析。
The dynamic stability of giant floating crane under working condition was worked out by using dynamic eigenvalue method.Load proportional coefficient and buckling load was obtained by dynamic and eigenvalue stability analysis under different combinations of lifting load,wind load and wave load.The calculation result shows that wind load and wave load hardly cause structural buckling compared to lifting load via their load proportional coefficient value.For lifting load eigenvalue buckling,its load proportional coefficient is more than 3 times the value of dynamic stability analysis,and the big difference between two analyses makes it necessary to analyze the dynamic stability for giant floating crane.
引文
[1]任会礼,王学林,胡于进,等.起重船吊物系统动力响应仿真[J].系统仿真学报,2007,19(12):2665~2668.
    [2]高飞,于骁,孙昕辉,等.基于MSC.ADAMS的起重船吊物系统动力响应仿真分析[J].起重运输机械,2012,(3):46~49.
    [3]秦仙蓉,廖鑫,李永凤,等.7500t浮式起重机金属结构的动态优化设计[J].中国工程机械学报,2012,10(2):161~165.
    [4]张戬杰,张氢,秦仙蓉,等.巨型浮吊随机风浪流载荷的数值模拟方法[J].同济大学学报(自然科学版),2009,37(增刊):64~69.
    [5]韩强.弹塑性系统的动力屈曲和分叉[M].北京:科学技术出版社,2000.
    [6]邓长根,巩俊松.动力失稳的拟静力刚度准则与能量判别准则[J].振动与冲击,2010,29(6):164~169.
    [7]黄友钦,顾明.风载荷下单层柱面网壳的动力稳定[J].振动与冲击,2011,30(2):39~43.
    [8]王述超,张行,叶志雄,等.超限高层建筑地震作用下的动力稳定性分析[J].振动与冲击,2009,28(4):149~152.
    [9]刘爱荣,禹奇才,宋瑞,等.地震作用下斜靠式拱桥的动力稳定性[J].深圳大学学报:理工版,2010,27(3):286~290.
    [10]徐艳,胡世德.大跨度拱桥弹性动力失稳的简化计算[J].土木建筑与环境工程,2012,34(3):89~94.
    [11]Messier R H,Mareal P V.A finite element algorithm for the de termination of dynamic buckling[C]//Finite Element Analysis of Transient nonlinear Structura1,Houston:ASCE Appl Mech Symp Series,1975,133~156.
    [12]中国船级社.船舶及海上设施起重设备规范[M].北京:人民交通出版社,2007.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心