单跨框架结构的减震加固技术研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
单跨框架结构的减震加固技术对于提高原框架结构的抗震性能、减小加固工程量和降低施工复杂性具有重要意义。文章通过设置防屈曲支撑(BRB)使单跨结构改变为框架—耗能支撑减震结构,从而减小原框架承担的地震效应的研究,阐明了单跨框架结构减震加固的基本原理,提出了耗能减震加固设计的准则,并对减震加固的工程实例进行了分析。结果表明:减震加固后,小震作用下的层间位移和由框架柱承担的地震剪力为加固前的30%~40%,罕遇地震作用下为25%~45%;BRB率先进入塑性变形,是整个结构的第一道地震防线;单跨框架结构采用BRB做减震加固,可有效提高结构的抗震性能。
Energy dissipation technology in seismic strengthening of single-span frame structures has important implications for improving their seismic performance and reducing the quantities and the complexity of construction. Being installed some Buckling Restrained Braces( BRB),a single-span frame structure could be changed to a frame-energy dissipation brace structure,and the seismic effects carried by frame were reduced obviously. Based on such a research,this paper presented the basic principle and design guidelines for energy dissipation strengthening,and analyzed an example. The results show that,after strengthening,the inter-story shear forces carried by columns and the interstory drifts under frequent earthquakes are reduced to less than 40%,whereas those under severe earthquakes are reduced to less than 45%; BRB takes a lead in entering the plastic deformation and plays a roll of the first seismic line; Strengthened with BRB,the seismic performance of the singlespan frame structure is effectively improved.
引文
[1]李建中,吕西林,李翔,等.汶川地震中钢筋混凝土框架结构结构的震害[J].结构工程师,2008,24(3)9-11.
    [2]徐向东,刘清阳.汶川地震中小学调查[J].山东建筑大学学报,2008,23(6)551-554.
    [3]GB 50011—2010,建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
    [4]GB 50223—2008,建筑工程抗震设防分类标准[S].北京:中国建筑工业出版社,2008.
    [5]林树枝,袁兴仁.翼墙加固单跨框架抗震性能研究[J].工程抗震与加固改造,2011,33(1):99-105.
    [6]张令心,王财权,刘洁平.翼墙加固方法对框架结构抗震性能的影响分析[J].土木工程学报,2012,45(增刊2):16-21.
    [7]袁兴仁,张鹏程,林树枝,等.利用加设钢支撑改变单跨框架结构体系的抗震加固效果研究[J].工程抗震与加固改造,2011,33(2):104-111.
    [8]Ou J.P.,Wu B.,Soong T.T..Recent advances in research on and application of passive energy dissipation systems[J].Earthquake Engineering and Engiheering Vibvation,1996,16(3):72-96.
    [9]张超,翁大根,吕西林,等.消能减震技术用于C类框架学校建筑提高一度抗震设防加固的探讨[J].防灾减灾工程学报,2012,32(4):408-416.
    [10]李国强,胡宝琳.屈曲约束支撑滞回曲线模型和刚度方程的建立[J].地震工程与工程振动,2007,(2):26-31.
    [11]Kiggins S.,Uang C.M..Reducing residual drift of bucklingrestrained braced frames as a dual system[J].Engineering Structures,2006,28:1525-1532.
    [12]顾炉忠,高向宇,徐建伟,等.防屈曲支撑混凝土框架结构抗震性能试验研究[J]建筑结构学报,2011,32(7):101-111.
    [13]黄海涛,高向宇,李自强,等.用附加约束屈曲支撑钢筋混凝土框架加固基友钢筋混凝土框架抗震性能试验研究[J]建筑结构学报,2013,34(12):52-61.
    [14]Tsai C.S.,Yung C.L.,Wen S.C.,et al.Mathematical modeling and full-scale shaking table tests for multi-curve buckling restrained braces[J].Earthquake Engineering and Engineering Vibration,2009,8(3):359-372.
    [15]李国强,王鹏,刘玉姝,等.BRB应用于混凝土框架的弹性层间位移角限值与设计建议[J].工程抗震与加固改造,2013,35(2):91-96.
    [16]耿克普,高向宇.内嵌式防屈曲支撑钢框架加固既有混凝土框架结构抗震性能分析[J].工程抗震与加固改造,2014,36(5):81-89.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心