STUDY ON THE COAL-ROCK INTERFACE RECOGNITION METHOD BASED ON MULTI-SENSOR DATA FUSION TECHNIQUE

英文篇名：STUDY ON THE COAL-ROCK INTERFACE RECOGNITION METHOD BASED ON MULTI-SENSOR DATA FUSION TECHNIQUE
中文刊名：Chinese Journal of Mechanical Engineering
英文刊名：中国机械工程学报(英文版)
英文作者：Ren Fang
英文作者：Yang Zhaojian
英文作者：Xiong Shibo
英文作者：Research Institute of Mechano-
英文作者：Electronic Engineering ;
英文作者：Taiyuan University of Technology ;
英文作者：Taiyuan 030024 ; China
英文关键词：Coal-rock interface recognition (CIR) Data fusion (DF) Multi-sensor
出版日期：2003-09-20
年：2003
期：03
出版单位：Chinese Journal of Mechanical Engineering

摘要

<正> The coal-rock interface recognition method based on multi-sensor data fusion technique is put forward because of the localization of single type sensor recognition method. The measuring theory based on multi-sensor data fusion technique is analyzed, and hereby the test platform of recognition system is manufactured. The advantage of data fusion with the fuzzy neural network (FNN) technique has been probed. The two-level FNN is constructed and data fusion is carried out. The experiments show that in various conditions the method can always acquire a much higher recognition rate than normal ones.
The coal-rock interface recognition method based on multi-sensor data fusion technique is put forward because of the localization of single type sensor recognition method. The measuring theory based on multi-sensor data fusion technique is analyzed, and hereby the test platform of recognition system is manufactured. The advantage of data fusion with the fuzzy neural network (FNN) technique has been probed. The two-level FNN is constructed and data fusion is carried out. The experiments show that in various conditions the method can always acquire a much higher recognition rate than normal ones.

引文

1 秦剑秋.自然γ射线煤岩界面识别传感器的理论建模及实验验证.煤炭学报,1996,21(5) :513～516
    2 廉自生.基于采煤机截割力响应的煤岩界面识别技术研究:[博士学位论文]北京:中国矿业大学,1995
    3 许永江.无源红外线煤岩界面探测系统.煤炭技术,1994,13(4) :10
    4 徐瑛.国外煤岩界面传感器开发动态综述.煤矿自动化,1995,16(2) :25～27
    5 聂伟荣.基于改进BP网络的地震动信号目标识别.南京理工大学学报(自然科学版),2000,24(1) :20～23,41
    6 Looney G G. Pattern recognition using neural networks. New York: Oxford University Press, 1997
    7 PoyuTson. Structural damage detection and identification using neural networks. AIAA Journal, 1994, 32(1) :176～186
    8 Cherian R P. A neural network approach for selection of powder metallurgy materials and process parameters. Artificial Intelligence in Engineering,2000,14(1) :39～44
    9 Raman H, Sunilkumar N. Multivariate modeling of water resources time series using artificial neural network. Hydrological Sciences Journal, 1995,40(2) : 145～163
    10 Kuo R J, Cohen P H. Intelligent tool wear estimation system through artificial neural network and fuzzy modeling. Artificial Intelligence in Engineering, 1998, 12(3) :229～242