烟囱爆破拆除的切口参数研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在烟囱爆破拆除时 ,爆破切口参数的确定通常都是按经验选取 ,至于参数选取的合理与否却很少深入研究。本文分析研究了切口形状对切角大小和切口高度的影响并建立了相应的数学模型 ,并结合工程实例讨论了切口形状对切角大小和切口高度的影响。
Cut parameters are usually determined by experiences when chimney is demolished by controlled blasting.However,it is rarelyinvestigated whether cut parameters are optimal.In this paper,effect of cut shape on cut angle and cut height is studied and corresponding mathematical models are established.An engineering example is analyzed with the models,and influence of cut shape on cut angle and cut height is discussed in detail.
引文
〔1〕 言志信,吴德伦,王后裕.钢筋混凝土筒形结构定向倾倒拆除过程研究[J].建筑结构,2002,32(4):60-61.
    〔2〕 何军.城市高耸筒式构筑物控制拆除理论与实践[D].北京科技大学博士论文,1998.
    〔3〕 李守巨,刘玉晶.爆破拆除砖烟囱爆破切口范围的计算[J].工程爆破,1999,5(2):1-4.
    〔4〕 金骥良.高层建(构)筑物整体定向爆破倒塌的切口参数[J].工程爆破,2003,9(4).1-6.
    〔5〕 杨栋.钢混烟囱控制爆破拆除及近场地震效应的研究[D].东北大学硕士论文,1996.
    〔6〕 成新法,冯长根,黄卫东.筒形簿壁建筑物爆破拆除切口研究[J].爆破,1999,16(3):15-19.
    〔7〕 李元亮,奉孝中.钢筋混凝土烟囱定向爆破拆除的力学分析[J].爆破器材,1998,27(4):29-31.
    〔8〕 李玉岐,谢康和,焦永斌,等.砖烟囱爆破切口形状对切角大小和切口高度的影响分析[J].爆破,2004,21(1):47-51.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心