振动主动控制技术的研究现状及发展趋势
|
摘要
振动控制一般分为被动、主动和半主动控制等类型。被动控制又称无源控制,它不需外界能源提供控制力,结构简单,易于实现,许多场合已获得了应用。为此,阐述了振动主动控制的发展概况和应用领域,总结了近年来该技术采用的控制方法、发展趋势及应用情况。
In this paper the present situation of application and development in active vibration controtechnology was indicated. Some control methods in resent years were generalized. Meanwhile, thdevelopment trends of the technology were also pointed out.
In this paper the present situation of application and development in active vibration controtechnology was indicated. Some control methods in resent years were generalized. Meanwhile, thdevelopment trends of the technology were also pointed out.
引文
[1]顾仲权,马扣根,陈卫东.振动主动控制[M].北京:国防工业出版社会,1997.
[2]P.Gardonios,S.J.Elliott.Passive and Active Isolation of Structural Vibration Transmissi-on between Two Plates Connected by A Set of Mounts[J].Journal of Sound and Vibration,2000,237(3):483-511.
[3]谢凌志,于建华.结构半主动控制的发展动态[J].建筑结构,2001,21(2):40-42.
[4]王加春,李旦,董申.机械振动主动控制技术的研究现状和发展综述[J].机械强度,2001,23(2):156-160.
[5]胡宗武.机床结构振动主动控制发展综述[J].机械强度,1995,17(2):55-60.
[6]王加春.超精密机床溜板的振动主动控制系统研究[D].哈尔滨:哈尔滨工业大学,2001.
[7]丁文镜.振动主动控制当前的主要课题研究[J].力学进展,1994,24(2):173-180.
[8]王加春,李旦,董申.振动主动控制中的三个问题[J].航空精密制造技术,2001,37(1):2-6.
[9]P.Gardonio,S.J.Elliott,R.J.Pinnington.Active Isolation of Structural Vibration on A Multiple-Degree-of-Freedom System Part II:Effectiveness of Active Control Strategies[J].Journal of Sound and Vibration,1997,207(1):95-121.
[10]李敏霞,刘季.主动结构控制算法综述[J].世界地震工程,1998,14(4):61-69.
[11]孙国春,史文库,田彦涛.振动主动控制技术的研究与发展[J].机床与液压,2004,(3):1-6.
[12]张春红,汤炳新.主动隔振技术的回顾与展望[J].河海大学常州分校学报,2002,16(2):1-6.
[13]黄文虎,王心清,张景绘,等.航天柔性结构振动控制的若干新进展[J].力学进展,1997,27(1):5–18.
[14]阎维明,周福霖,谭平.土木工程结构振动控制的研究进展[J].世界地震工程,1997,13(2):8-20.
[2]P.Gardonios,S.J.Elliott.Passive and Active Isolation of Structural Vibration Transmissi-on between Two Plates Connected by A Set of Mounts[J].Journal of Sound and Vibration,2000,237(3):483-511.
[3]谢凌志,于建华.结构半主动控制的发展动态[J].建筑结构,2001,21(2):40-42.
[4]王加春,李旦,董申.机械振动主动控制技术的研究现状和发展综述[J].机械强度,2001,23(2):156-160.
[5]胡宗武.机床结构振动主动控制发展综述[J].机械强度,1995,17(2):55-60.
[6]王加春.超精密机床溜板的振动主动控制系统研究[D].哈尔滨:哈尔滨工业大学,2001.
[7]丁文镜.振动主动控制当前的主要课题研究[J].力学进展,1994,24(2):173-180.
[8]王加春,李旦,董申.振动主动控制中的三个问题[J].航空精密制造技术,2001,37(1):2-6.
[9]P.Gardonio,S.J.Elliott,R.J.Pinnington.Active Isolation of Structural Vibration on A Multiple-Degree-of-Freedom System Part II:Effectiveness of Active Control Strategies[J].Journal of Sound and Vibration,1997,207(1):95-121.
[10]李敏霞,刘季.主动结构控制算法综述[J].世界地震工程,1998,14(4):61-69.
[11]孙国春,史文库,田彦涛.振动主动控制技术的研究与发展[J].机床与液压,2004,(3):1-6.
[12]张春红,汤炳新.主动隔振技术的回顾与展望[J].河海大学常州分校学报,2002,16(2):1-6.
[13]黄文虎,王心清,张景绘,等.航天柔性结构振动控制的若干新进展[J].力学进展,1997,27(1):5–18.
[14]阎维明,周福霖,谭平.土木工程结构振动控制的研究进展[J].世界地震工程,1997,13(2):8-20.
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心