橡胶支座水平剪切弹塑性力学性能试验研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
通过对铅芯橡胶支座剪切弹塑性力学性能试验,发现铅芯橡胶支座的滞回曲线与加载时程密切相关,在同一水平应变下,水平剪切刚度随加载次数的增多有所减小,最后趋于稳定;在不同应变下,水平剪切刚度随应变的增大而减小.试验还表明铅芯橡胶支座不仅在大应变存在着小应变滞回特性,而且在小应变也存在着小应变滞回特性.
Based on the test of shearing elastic-plastic mechanical behaviour of leading rubber bearings,it was found that the hysteresis behaviour was closely correlated with loading history.The horizontal shear stiffness decreased with loading times when the level of strain was identical,and the stiffness became steady on the end.In the case of varying strain,the horizontal shear stiffness decreased with the strain.The test also showed that the small strain hysteresis took place not only with a large strain but also with small one.
引文
[1]唐家祥.建筑结构隔震设计[M].武汉:华中理工大学出版社.1993.
    [2]中华人民共和国建设部.JG 118—2000建筑隔震橡胶支座[M].北京:中国标准出版社,2000.
    [3]Architectural Institute of Japan.Recommendation for the de-sign of base isolated building[M].Tokyo:Marozen Corpora-tion,1993.
    [4]刘文光,周福霖,冯德民,等.G4天然橡胶隔震支座力学性能[R].广州:广州大学抗震研究中心,2002:331-502.
    [5]刘文光,周福霖,冯德民,等.G6天然橡胶隔震支座力学性能[R].广州:广州大学抗震研究中心,1999:572-685.
    [6]HIRATA K,TAKAHIRO S.Fragility estimation of an isolatedFBR structure considering the ultimate state of ubber bearings[J].Nuclear Engineering and Design,1994,147(2):183-196.
    [7]日本建筑学会.日本建筑学会学术讲演梗概集:B-2[C].东京:日本建筑学会,2000:639-642.
    [8]日本建筑学会.日本建筑学会学术讲演梗概集:B-2[C].东京:日本建筑学会,2001:705-706.
    [9]刘文光.橡胶隔震支座力学性能及隔震结构地震反应分析研究[D].北京:北京工业大学,2003

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心