ADAS系统测试平台设计及实现

详细信息    查看全文 | 推荐本文 |

英文篇名：Design and implementation of ADAS system test platform 作者：孙涛 ; 丁琴琴 ; 李卫兵 ; 李娟 英文作者：SUN Tao;DING Qinqin;LI Weibing;LI Juan;Anhui Province Key Laboratory of Intelligent Connected Technology,Anhui Jianghuai Automobile Group Co., Ltd.; 关键词：车辆工程 ; 测试平台 ; ADAS系统 ; PreScan ; CarSim ; HWT时间 英文关键词：vehicle engineering;;test platform;;ADAS system;;PreScan;;CarSim;;HWT time 中文刊名：SYCS 英文刊名：China Measurement & Test 机构：安徽江淮汽车集团股份有限公司汽车智能网联技术安徽省重点实验室; 出版日期：2019-04-30 出版单位：中国测试 年：2019 期：v.45;No.249 基金：汽车智能网联技术安徽省重点实验室项目(2017010201) 语种：中文; 页：SYCS201904026 页数：6 CN：04 ISSN：51-1714/TB 分类号：155-160

摘要

为实现ADAS系统的仿真测试,解决传统实车验证存在的测试成本高、周期长、场景不可复用、无法定量分析等问题,设计实现面向SAE 2级的智能网联汽车系统级测试平台。提出利用PreScan软件进行交通场景仿真及虚拟传感器建模、CarSim软件进行车辆动力学建模,建立涵盖真实底盘执行系统的测试平台方案。基于ISO 15622中定义的典型工况进行仿真分析,搭建ACC功能涉及的Cut-off虚拟交通场景;基于试验数据,对车辆动力学及虚拟传感器进行参数化建模;测量HWT时间,实现法规要求参数的定量分析。构建的测试平台能够为ADAS系统提供完整的"人-车-路"仿真测试环境,为国内进行ADAS系统测试评价提供一个良好的研究平台。
        In order to realize the simulation test of ADAS system and solve the problems such as high test cost,long cycle, non-reusable scenario, and non-quantitative analysis in traditional real vehicle verification, an intelligent connected vehicle system-level test platform for SAE Level 2 is designed. PreScan software is used for traffic scene simulation and virtual sensor modeling, CarSim software is used for vehicle dynamics modeling, and a test platform scheme covering the real chassis execution system is established. The simulation analysis is carried out based on the typical working conditions defined in ISO 15622, build a Cut-off virtual traffic scenario involving ACC functions. Based on the experimental data, the parametric modeling of vehicle dynamics and virtual sensors is set up. Measure HWT time, and the quantitative analysis of parameters required by regulations is realized. The built test platform can provide a complete "human-vehicle-road "simulation testing environment for ADAS systems, and provide a good research platform for domestic ADAS system testing and evaluation.

引文

[1]郭俊.我国智能网联汽车政策现状与政策趋势浅析[J].科技与创新,2018(3):43-45.
    [2]JACOBSON J,JANEVIK P,WALLIN P.Challenges in creating astazero,the active safety test area[C]//Transport Research Arena(TRA)5th Conference:Transport Solutions from Research to Deployment.2014.
    [3]李诗福.汽车避撞控制系统建模与仿真研究[D].长沙:湖南大学,2009.
    [4]孙扬.无人驾驶车辆智能水平的定量评价[D].北京:北京理工大学,2014.
    [5]张昕.无人车通过特殊区域智能行为评价研究[D].北京:北京理工大学,2015.
    [6]GUVENC B A,GUVENC L,KARAMAN S.Robust yaw stability controller design and hardware-in-the-loop testing for a road vehicle[J].Vehicular Technology,IEEE Transactions,2009,58(2):555-571.
    [7]SAIFIA D,CHADLI M,KARIMI H R,et al.Fuzzy control for electric power steering system with assist motor current input constraints[J].Journal of the Franklin Institute,2015,352(2):562-576.
    [8]董永坤,王春香,杨明.基于PreScan软件的行人检测仿真[J].交通信息安全,2013,5(31):136-144.
    [9]刘颖,朱西产,李佳琦.PreScan在先进驾驶辅助系统评价中应用[J].佳木斯大学学报(自然科学版),2013,31(5):696-699.
    [10]何承坤,宋娟,周唯.汽车自动驾驶测评方法研究[J].工业技术创新,2016,3(2):108-114.
    [11]任龙.基于CARSIM的汽车ABS整车模糊控制研究[D].重庆:重庆交通大学,2013.
    [12]郭建辉.基于Carsim的整车半主动悬架控制策略仿真研究[D].西安:长安大学,2017.
    [13]李志魁.基于CarSim的整车动力学建模与操纵稳定性仿真分析[D].长春:吉林大学,2007.