不同裂纹尺寸铝板的电磁声发射特性

详细信息    查看全文 | 推荐本文 |

英文篇名：Electromagnetic Acoustic Emission Characteristics of Aluminum Plates with Different Crack Sizes 作者：龙飞飞 ; 刘永轩 ; 沈书乾 ; 李伟 英文作者：LONG Feifei;LIU Yongxuan;SHEN Shuqian;LI Wei;College of Electro Mechanical Engineering,Dalian Minzu University;HSE Key Laboratory of China Petroleum Group Safety Environmental Protection Technology Research Institute;Mechanical Science and Engineering College,Northeast Petroleum University;Guangdong Special Equipment Inspection Institute Maoming Inspection Institute; 关键词：电磁声发射 ; 铝板裂纹 ; 洛伦兹力 ; 小波包分析 英文关键词：electromagnetic acoustic emission;;aluminum plate crack;;Lorentz force;;wavelet packet analysis 中文刊名：WSJC 英文刊名：Nondestructive Testing 机构：大连民族大学机电工程学院;中国石油集团安全环保技术研究院HSE重点实验室;东北石油大学机械科学与工程学院;广东省特种设备检测研究院茂名检测院; 出版日期：2019-05-10 出版单位：无损检测 年：2019 期：v.41;No.410 语种：中文; 页：WSJC201905004 页数：4 CN：05 ISSN：31-1335/TG 分类号：12-15

摘要

利用电磁学电致涡流原理,采用有限元方法,建立了电磁声发射数学模型,对含裂纹的铝板进行了电磁场数值模拟,分析了裂纹尺寸对裂纹尖端洛伦兹力的影响,并在实验室条件下,对不同尺寸裂纹进行了电磁声发射试验。结果表明,通过幅值参数可以判断试件有无缺陷,在频谱分析时,信号的高频成分有峰值现象。利用小波包分析方法对声发射信号波形进行了分解与重构,发现在裂纹长度或者深度增加时,高频信号的波形和频谱的峰值电压也逐渐变大,仿真分析与试验结果一致。
        In this paper,a mathematical model of electromagnetic acoustic emission is established by using electromagnetic eddy current principle and finite element method.The electromagnetic field of cracked aluminum plate is simulated numerically,and the influence of crack size on the Lorenz force at the crack tip is analyzed.Under laboratory conditions,electromagnetic acoustic emission experiments with different crack sizes are carried out.The results show that the amplitude parameters can determine whether there exists a defect or not in the specimen.In the frequency analysis,the high frequency component of the signal has a peak phenomenon,and the wavelet packet analysis is used to decompose and reconstruct the acoustic emission waveform.It is found that when the crack length or depth increases,the peak waveform and the peak voltage of the high frequency signal also increase gradually.The simulation analysis is in agreement with the experimental results.

引文

[1]曹国强.机械工程概论[M].北京:航空工业出版社,2008.
    [2]高秀华,王云超,李国忠,等.金属结构[M].北京:化学工业出版社,2006.
    [3]刘素贞,杨庆新,金亮.电磁声发射技术在无损检测中的应用[J].电工技术学报,2009,24(1):23-27.
    [4]FINKEL P,GODINEZ V.Electromagnetic simulation of the ultrasonic signal for nondestructive detection of ferromagnetic inclusions and flaws[J].IEEE Transactions on Magnetics,2004,40(4):2179-2181.
    [5]陈中剑,杨庆新.电磁声发射技术研究[J].大众科技,2006(6):23-24.
    [6]张闯,刘素贞.基于大电流直接加载的电磁声发射试验[J].电工技术学报,2013,28(1):101-105.
    [7]刘素贞,金亮,张闯.电磁声发射检测技术的涡流激励方法[J].电工技术学报,2012,27(7):153-159.
    [8]李莉.电磁声发射机理与实验研究[D].大庆:东北石油大学,2016.
    [9]张闯,刘素贞,金亮,等.基于大电流直接加载的电磁声发射试验[J].电工技术学报,2013,28(1):101-105.
    [10]吴江,周志雄,贾登.交流电磁场检测激励频率的有限元模拟优化[J].无损检测,2016,38(7):1-5.
    [11]OZEVIN D,YALCINKAYA H.New leak localization approach in pipelines using single-point measurement[J].Journal of Pipeline Systems Engineering&Practice,2014,5(2):20-21.