基于Abaqus的直齿圆柱齿轮疲劳裂纹应力强度因子研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research of Stress Intensity Factor of Fatigue Crack of Spur Gear based on Abaqus 作者：裴未迟 ; 楚京 ; 纪宏超 ; 李耀刚 ; 董建伟 英文作者：Pei Weichi;Chu Jing;Ji Hongchao;Li Yaogang;Dong Jianwei;College of Mechanical Engineering,North China University of Science and Technology;School of Mechanical Engineering,University of Science and Technology Beijing;National Center for Materials Service Safety,University of Science and Technology Beijing; 关键词：应力强度因子 ; Abaqus ; 裂纹扩展 ; 有限元模型 英文关键词：Stress intensity factor;;Abaqus;;Crack propagation;;Finite element model 中文刊名：JXCD 英文刊名：Journal of Mechanical Transmission 机构：华北理工大学机械工程学院;北京科技大学机械工程学院;北京科技大学国家材料服役安全科技中心; 出版日期：2019-02-15 出版单位：机械传动 年：2019 期：v.43;No.266 基金：国家自然科学基金(51505124);; 华北理工大学博士基金启动项目(BS2017020);华北理工大学研究生创新项目(2018S23) 语种：中文; 页：JXCD201902002 页数：5 CN：02 ISSN：41-1129/TH 分类号：14-18

摘要

应力强度因子是研究断裂问题的重要参量,可以度量和控制裂纹的发生发展,对研究裂纹的疲劳损伤及预估寿命具有重要意义。为了研究直齿圆柱齿轮三维裂纹应力强度因子的变化规律,利用Abaqus建立了含半椭圆形初始裂纹的三维有限元模型,计算了半椭圆形裂纹前缘应力强度因子,分析了裂纹大小、形状以及载荷变化对裂纹前缘应力强度因子的影响规律。结果表明,齿根裂纹在扩展过程中主要表现为张开型裂纹;随着载荷的增大,应力强度因子K_I不断增大,但其分布规律保持不变;在载荷不变的情况下,K_I随着裂纹尺寸的增大而增大;在建立的半椭圆形裂纹中,随着长轴的增加,裂纹前缘上的K_I波动逐渐变小。
        The stress intensity factor is an important parameter to study the fracture problem. The occurrence and development of gear cracks can be measured and controlled,which is of great significance for studying the fatigue damage of cracks and predicting life. In order to study the variation law of three-dimensionalcrack stress intensity factor of spur gears,a three-dimensional finite element model with initial semi-ellipticalcracks is established by Abaqus software. The stress intensity factor of the semi-elliptical crack front is calculated,and the influence of crack size,shape and load variation on the stress intensity factor at the leading edge isanalyzed. The results show that the cracks of the roots of the teeth mainly manifested as open cracks during theexpansion process. As the load increases,stress intensity factor K_I also increases,but its distribution rules remain unchanged. With constant load,K_I increases with the increase of crack size. In the establishment of semi-elliptical cracks,as the long axis increases,the K_I fluctuations on the crack front gradually become smaller.

引文

[1]MACKIN T J,ANDERSON N,AGUILAR S,et al.Fatigue failure of a star-ratchet gear[J].Engineering Failure Analysis,2013,32(9):334-347.
    [2]凌静秀,孙伟,杨晓静,等.复杂应力状态下TBM刀盘裂纹应力强度因子分析[J].哈尔滨工程大学学报,2017,38(4):633-639.
    [3]贺泽,俞缙,张建智,等.渗透压下岩石翼形裂纹应力强度因子及断裂判据[J].华侨大学学报(自然科学版),2017,38(6):799-805.
    [4]王延忠,田志敏,侯良威,等.航空重载面齿轮三维裂纹分析与疲劳寿命预测[J].北京航空航天大学学报,2014,40(2):148-153.
    [5]吴金亮,汪中厚,李刚.斜齿圆柱齿轮裂纹扩展特性及剩余寿命研究[J].机械传动,2014,38(12):1-4.
    [6]刘双,朱如鹏.基于ABAQUS的渐开线齿轮齿根裂纹扩展仿真[J].南京航空航天大学学报,2011,43(1):86-90.
    [7]刘鑫博,曾晓松,刘勇.直齿轮弯曲疲劳裂纹的扩展行为预测与分析[J].机械传动,2016,40(9):179-183.
    [8]许德涛,唐进元,周炜.基于扩展有限元法的齿根裂纹扩展规律[J].中南大学学报(自然科学版),2016,47(8):2668-2675.
    [9]许德涛,唐进元,周炜,等.基于XFEM的齿轮腹板结构与齿根裂纹扩展关联规律研究[J].机械传动,2016,40(12):153-158.
    [10]ZOUARI S,MAATAR M,FAKHFAKH T,et al.Following spur gear crack propagation in the tooth foot by finite element method[J].Journal of Failure Analysis&Prevention,2010,10(6):531-539.
    [11]李刚,李秀红,任家骏,等.高速列车齿轮副裂纹扩展寿命研究[J].机械传动,2017,41(2):17-21.
    [12]CURàF,MURA A,ROSSO C.Investigation of crack propagation path in tube gears[J].Procedia Structural Integrity,2017,7:476-483.
    [13]CURàF,MURA A,ROSSO C.Crack propagation behavior in planet gears[J].Procedia Structural Integrity,2016,2:3610-3616.
    [14]于世光.渐开线齿轮齿根疲劳断裂特性分析[D].南京:南京航空航天大学,2009:15-68.
    [15]秦超.齿轮弯曲疲劳强度及疲劳裂纹扩展研究[D].郑州:河南工业大学,2015:16-53.
    [16]杜霈轩.齿轮构件接触疲劳寿命评估方法及可靠性研究[D].贵阳:贵州大学,2017:45-59.
    [17]才建.汽车齿轮表面疲劳裂纹扩展机理研究[D].武汉:武汉理工大学,2015:37-39.
    [18]丁海荣.直齿圆柱齿轮齿根裂纹的扩展分析和疲劳寿命预测[D].兰州:兰州理工大学,2016:18-23.
    [19]段静波,李道奎,雷勇军.断裂力学分析的奇异有限元法研究综述[J].机械强度,2012,34(2):108-115.