矿用钻杆接头螺纹加工切屑形成试验研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Experimental Study on Chip Formation of Threaded Joints for Mining Drill Pipe 作者：刘欢 ; 田东庄 ; 骆晓炜 ; 赵飞 英文作者：Liu Huan;Tian Dongzhuang;Luo Xiaowei;Zhao Fei;China Coal Research Institute;Xi'an Research Institute Co., Ltd., China Coal Technology and Engineering Group; 关键词：矿用钻杆 ; 切屑 ; 锯齿 ; 切削用量 英文关键词：mining drill pipe;;chip;;serrated;;cutting amount 中文刊名：MKJX 英文刊名：Coal Mine Machinery 机构：煤炭科学研究总院;中煤科工集团西安研究院有限公司; 出版日期：2019-02-15 出版单位：煤矿机械 年：2019 期：v.40;No.372 语种：中文; 页：MKJX201902018 页数：3 CN：02 ISSN：23-1280/TD 分类号：55-57

摘要

针对矿用钻杆接头螺纹加工切屑缠绕刀具的问题进行接头螺纹切屑形成的研究,设计切削参数的正交试验,并结合金相显微镜对切屑微观形貌观察,分析得到了切屑的锯齿微观形貌随切削用量的变化规律,并通过锯齿形貌与切屑形成过程中切削力、切削热的关系,得到了切削力、切削热与切削用量的变化规律。切屑形成实验为接头加工质量提供可靠保证,并对进一步研究切削机理、科学地选择工艺参数具有重要指导意义。
        Aimming at the problem of cutting chip winding tool for the drill pipe joint thread processing,the formation of joint thread chip was studied,the orthogonal test of cutting parameters was designed, and the microscopic morphology of the chip was observed by metallographic microscope. The variation of the sawtooth microstructure of the chip with the cutting amount was obtained,and the zigzag morphology was observed. The relationship between cutting force, cutting heat and cutting amount was obtained in the relationship between cutting force and cutting heat during chip formation. The chip formation experiment provides a reliable guarantee for the joint processing quality, and has important guiding significance for further research on cutting mechanism and scientific selection of process parameters.

引文

[1]牟培英. ZDY3000LG高转速钻机螺旋钻杆的研究与应用[J].煤矿机械, 2017,38(5):124-126.
    [2]景璐璐,陈明,安庆龙. SKD11硬切削锯齿形切屑形成机理试验研究[J].中国机械工程,2014,25(23):3 151-3 154+3 159.
    [3]刘龙飞,胡少华,卢立伟.切削速度对AZ31镁合金高速切削切屑形成的影响[J].稀有金属,2016,40(7):654-659.
    [4]肖江胜,张霖,刘玉波.高速切削加工锯齿形切屑形成机理研究[J].煤矿机械,2018,39(7):44-46.
    [5]朱红雨,李迎.基于微观锯齿状切屑的旋风硬铣削加工机理研究[J].组合机床与自动化加工技术,2014(6):118-120.
    [6]孙晓羽.锯齿形切屑成形机理分析与计算机模拟[J].工具技术,2016,50(11):86-88.
    [7]段春争,王肇喜,李红华.高速切削锯齿形切屑形成过程的有限元模拟[J].哈尔滨工程大学学报,2014,35(2):226-232.
    [8]王兵.高速切削材料变形及断裂行为对切屑形成的影响机理研究[D].济南:山东大学,2016.
    [9]高亚运.金属切削过程中锯齿形切屑形成机理研究[D].上海:上海工程技术大学,2016.