Computational Fluid Dynamics (CFD) Investigation of the Oxy-combustion Characteristics of Diesel Oil, Kerosene, and Heavy Oil Liquid Fuels in a Model Furnace

详细信息    查看全文

• 作者：Pervez Ahmed ; M. A. Habib ; Rached Ben-Mansour ; A. F. Ghoniem
• 刊名：Energy & Fuels
• 出版年：2016
• 出版时间：March 17, 2016
• 年：2016
• 卷：30
• 期：3
• 页码：2458-2473
• 全文大小：1136K
• ISSN：1520-5029

文摘

This study investigated the air- and oxy-combustion characteristics of liquid fuels (diesel oil, kerosene, and heavy oil), using a computational fluid dynamics (CFD) approach. Various key aspects of the combustion characteristics of these liquid fuels in a down-fired laboratory furnace are presented. The flow characteristics, flame structure, fuel evaporation, and the formation of CO in turbulent nonpremixed flames with different O₂/CO₂ fractions are discussed in detail. The results of oxy-combustion are also compared with air combustion. Three cases of oxy-combustion (i.e., OF21, OF30, and OF35, with oxygen contents of 21%, 30%, and 35% (by volume), respectively) are considered. Evaporation rates were reduced when N₂ in the air was replaced by CO₂ in oxy-combustion; however, similar evaporation rates are obtained when the volume of O₂ in oxy-combustion was increased to 30%. Combustion temperature decreased when N₂ in the air was replaced by CO₂ in the oxy-combustion environments at the same mole fraction. However, when the O₂/CO₂ mole fraction was increased, the temperatures were similar to that of the air-combustion environments. Moreover, because of better evaporation of the fuel and the higher temperatures attained in oxy-combustion, the flame length decreased. By contrast, oxy-combustion yields high CO concentrations compared with the air-combustion environments. The CO concentrations decreased when oxygen content in the oxy-combustion cases was increased. In addition, among the three fuels considered, heavy oil predicted the highest CO concentrations, while diesel and kerosene were in a comparable range. Furthermore, soot concentrations are found to be lower in oxy-combustion, compared to air-combustion environments.