Laboratory model study of the effect of aeration on axial velocity attenuation of turbulent jet flows in plunge pool

详细信息    查看全文

• 作者：Jun DENG ((邓军)) ^{djhao2002@scu.edu.cn" class="auth_mail" title="E-mail the corresponding author}Author Vitae ; Fa-xing ZHANG ((张法星)) ; ^{zhfx@scu.edu.cn" class="auth_mail" title="E-mail the corresponding author} ; Zhong TIAN ((田忠)) ; Wei-lin XU ((许唯临)) ; Bin LIU ((刘斌)) ; Wang-ru WEI ((卫望汝))
• 关键词：jet flow ; air concentration ; velocity
• 刊名：Journal of Hydrodynamics, Ser. B
• 出版年：2015
• 出版时间：December 2015
• 年：2015
• 卷：27
• 期：6
• 页码：913-918
• 全文大小：860 K

文摘

In the laboratory model experiment, the velocities of the jet flow along the axis are measured, using the CQY−Z8a velocity-meter. The velocity attenuations of the jet flow along the axis under different conditions are studied. The effects of the aeration concentration, the initial jet velocity at the entry and the thickness of the jet flow on the velocity attenuation of the jet flow are analyzed. It is seen that the velocity attenuation of the jet flow along the axis sees a regular variation. It is demonstrated by the test results that under the experimental conditions, the velocity along the axis decreases linearly. The higher the air concentration is, the faster the velocity will be decayed. The absolute value of the slope K increases with the rise of the air concentration. The relationship can be defined as K = AC_a+ K_b. The coefficient A is 0.03 under the experimental conditions. With the low air concentration of the jet flow, the thinner the jet flow is, the faster the velocity will be decayed. With the increase of the air concentration, the influence of the thickness of the jet flow on the velocity attenuation is reduced. When the air concentration is increased to a certain value, the thickness of the jet flow may not have any influence on the velocity attenuation. The initial jet velocity itself at the entry has no influence on the variation of the velocity attenuation as the curves of the velocity attenuation at different velocities at the entry are practically parallel, even coinciding one with another. Therefore, improving the air concentration of the jet flow and dispersing the jet flow in the plunge pool could reduce the influence of the jet flow on the scour.