引文
Abrahamson G R.1961.Permanent periodic surface defor-mations due to a traveling jet.ASME J.Appl.Mech.,28:519.
Aleseeveskii V P.1966.Penetration of a rod into a tar-get at high velocity.Combustion,Explosion,and ShockWaves,2:99-106.
Allen W A,Mapes J M,Wilson W G.1954.An effect pro-duced by oblique impact of a cylinder on a thin target.J.Appl.Phys.,25:675-676.
Bahrani A S,Black T J,Crossland B.1968.The mechanicsof wave formation in explosive welding.Proc.Roy.Soc.London,A,296:123-136.
白以龙.1992.冲击载荷下材料的损伤和破坏.见:冲击动力学进展,王礼立等编,合肥:中国科技大学出版社,34-57(Bai Y L.1992.Damage and failure of ma-terials under impact loading.in:Advances in ImpactDynamics,Wang L L et al ed.Hefei:China Sicence andTechnology University Press,34-57(in Chinese))
Birkhoff G,MacDougall D P,Pugh E M,Taylor G.1948.Explosives with lined cavities.J.Appl.Phys.,19:563-582.
Bolshakov A,Pharr G M.1998.Influence of pile-up onthe measurement of mechanical properties by load anddepth sensing indentation techniques.J.Mater.Res.,13:1049-1058.
Butkovich T R.1965.Calculation of the shock wave froman underground nuclear explosion in granite.J.Geo-phys.Res.,70:885-892.
Carl L R.1944.Brass weld,made by detonation Impulse.Metal.Prog.,46:102-103.
陈力.1989.一维煤与瓦斯突出中破坏阵面恒稳推进的实验研究.[硕士论文].北京:中国科学院力学研究所(Chen L.1989.Experimental research on steady ad-vancing of failure front in one-dimensional coal and gasoutburst.[Master Thesis].Beijing:Institute of Mechan-ics,Chinese Academy of Science(in Chinese))
Cheng C M(郑哲敏).1952.Analysis of pipe vibra-tions with internal fluid flow.A report submitted to theByron-Jackson Pump.Co.at Los Angeles,California,January.
Cheng C M.1957.Problems in hydro-elasticity.in:Pro-ceedings of9th International Congress of Applied Me-chanics,University of Bruxelles,Avenue Franklin Roo-sevelt,7:497-508.
Cheng C M.1986a.Mechanics of explosive welding,in:Proceedings of the International Sympousium on IntenseLoadings and Its Effects,Beijing,848-853.
Cheng C M.1986b.Several problems in hydro-elasto-plastic dynamics,in:Proceedings of the internationalSympousium on Intense Loadings and Its Effects,Bei-jing,1-12.
Cheng C M.1991.On the study of explosion dynamicsat the institute of mechanics.Advances in Science ofChina,1:81-106.
Cheng C M,Li G H.1986.Effects of strength and com-pressibility of materials on wave formation at interface inexplosive welding.in:Proceedings of the InternationalSympousium on Intense Loadings and Its Effects,Bei-jing,524-529.
Cheng C M,Tan Q M.1989.Mechanism of wave formationat the interface in explosive welding.Acta Mech.Sinica,5:97-108.
Cheng C M,Cheng Y T.1997.On the initial unloadingslope in indentation of elasto-plastic solids by an inden-ter with an axisymmetric smooth profile.Appl.Phys.Lett.,71:2623-2625.
Cheng Y T,Cheng C M.1998.Scaling approach to conicalindentation in elastic-plastic solids with work hardening.J.Appl.Phys.,84:1284-1291.
Cheng Y T,Cheng C M.2004.Scaling,dimensional anal-ysis,and indentation measurements.Mater.Sci.Eng.R,44:91-149.
Chou P C.1977.The stability of shaped charge.J.Appl.Phys.,48:4187-4195.
Cole P.1960.水下爆炸(中译本).北京:国防科学出版社(Cole P.1960.Underwater Explosion(Chinese ver-sion),Beijing:National Defense Press(in Chinese))
Cowan G R,Bergmann O R,Holtzman A H.1871.Mech-anism of bond zone wave formation in explosion cladmetals.Metall.Trans.,2:3145-3155.
Crossland B.1982.Explosive Welding of Metals and ItsApplications.Clarendon Press.
丁晓良,俞善炳,丁雁生,寇绍全,谈庆明,郑哲敏.1989.煤在瓦斯渗流作用下持续破坏的机制.中国科学A,6:600-607(Ding Y L,Yu S B,Ding Y S,Kou S Q,TanQ M,Zheng Z M.1989.Continuous damage mechanismof coal under gas seepage.China Science A,6:600-607(in Chinese))
Driscoll N W,Weissel J K,Goff J A.2000.Potential forlarge-scale submarine slope failure and tsunami gener-ation along the U.S.mid-Atlantic coast.Geology,28:407-410.
DuPont E I.1954.Blasters Handbook.SesquicentennialEdition Revised,Wilmington:E.I DuPont de Nemours&Compant(INC)Explosives Department,374-375.
Eggers J.1997.Nonlinear dynamics and breakup of free-surface flows.Rev.Mod.Phys.,69:865-927.
Eichelberger R J.1956.Experimental test of the theory ofpenetration by metallic Jets.J.Appl.Phys.,27:63-68.
Eringen A C.1977.Continuum Mechanics at the AtomicScale.Crystal Lattice Defects,7:109-130.
Ezra A A.1973.Principles and Practice of Explosive Met-alworking.Industrial Newspaper Limited.
范良藻,孟珊.1964.爆炸成形的成形过程.[研究报告].北京:中国科学院力学研究所(Fan L Z,Meng S.1964.Explosive forming process.[Research report].Beijing:Institute of Mechanics,Chinese Academy of Science(inChinese))
Findik F.2011.Recent developments in explosive welding,Mater.Design,32:1081-1093.
Fischer-Cripps A C.2002.Naoindentation.Springer,NewYork.
Galileo Galilei.1638.Dialogue Concerning Two New Sci-ences,Elsevier.
Moridis,G J,Collett T S,Boswell R,Kurihara M,ReaganM T,Koh C,Sloan E D.2009.Towards production fromgas hydrates:Current status,assessment of resources,and simulation-based evaluation of technology and po-tential.SPE Reservoir Evaluation and Engineering,10:745-771.
Griffith A A.1921.The phenomena of rupture and flow insolids.Phil.Trans.A,221:163-198.
洪友士.2004.郑哲敏先生主要经历与成就.见:应用力学进展,北京:科学出版社(Hong Y S.2004.Themain experience and achivements of Zhe-Min Zheng.in:Advances in Applied Mechanics,Beijing:Science Press(in Chinese))
Hunt J N.1968.Wave formation in explosive welding.Phil.Mag.,17:669-680.
Hutchinson J W.1968.Singular behavior at the end of atensile crack tip in a hardening material.J.Mech.Phys.Solids,16:13-31.
Irwin G R.1951.Analysis of stresses and strain near theend of a crack transversing a plate.ASME J.Appl.Mech.,24:361-364.
Johnson G W.1959.Some basic data on undergroundnuclear explosions,Lwarence Radiation Laboratory.UCRL-5675.
Kowalick J,Hay D R.1871.A mechanism of explosivebonding.Metall.Trans.,2:1955-1958.
鲁晓兵,张旭辉,郑哲敏,刘乐乐.2011.机械-热水合物开采方法.[研究报告].北京:中国科学院力学研究所(Lu X B,Zhang X H,Zheng Z M,Liu L L.2011.Mechanical-thermal method of hydrate production.[Re-search report].Beijing:Institute of Mechanics,ChineseAcademy of Science(in Chinese))
Meyers M A.1994.Dynamic Behavior of Materials.JohnWilley&Sons,INC,New York.
Munroe C E.1888a.Modern explosives.Scribners,5:563-576.
Munroe C E.1888b.Wave-like effects produced by detona-tion of guncotton.Amer.J.Science,36:48-50.
Nuckolls J H.1959.A computer calculation of Rainier(Thefirst100milliseconds),Lwarence Radiation Laboratory,UCRL-5675.
Oliver W C,Pharr G M.1992.An improved technique fordetermining hardness and elastic modulus using load anddisplacement sensing indentation experiments,J.Mater.Res.,7:1564-1583.
Oliver W C,Pharr G M.2004,Measurement of hardnessand elastic modulus by instrumented indentation:Ad-vances in understanding and refinements to methodol-ogy,J.Mater.Res.,19:3-20.
Orowan E.1948.Fracture and strength of solids,Report ofProgress in Physiscs,12:185-232.
Peng F J,Tan Q M,Cheng C M.2000.Laboratory studyon cracks in saturated sands.Acta Mech.Sinica,16:48-54.
Philipchuk V.1959.Explosive welding and forming openanother door for industry,Weld Engineering,44:6l-62.
钱学森.1957.论技术科学.科学通报,4:97-104(Qiang XS.1957.On technical science.Chinese Science Bulletin,4:97-104(in Chinese))
Rayleigh L.1879.On the capillary phenomenon of jets.Proc.Roy.Soc.London,29:71-97.
Rice J R.1968.A path independent integral and approx-imation analysis of strain concentration by notches andcracks,ASME J.Appl.Mech.,35:379-386.
Rice J R,Rosengren G F.1968.Plane strain deforma-tion near a crack tip in power law hardening material,J.Mech.Phys.Solids,16,1-12.
Robinson J L.1975.Mechanics of wave formation in impactwelding,Phil.Mag.,31:587-590.
Snay H G.1956.Hydrodynamics of underwater explosions.in:Symposium on Naval Hydrodynamics.(Sherman FS ed.),325.
谈庆明.2005.量纲分析.合肥:中国科技大学出版社(Tan Q M.2005.Dimensional Analysis.Hefei:ChinaScience and Technology University Press(in Chinese))
Tate A.1967.A theory for the deceleration of long rodsafter impact.J.Mech.Phys.Solids,15:387-399.
Taylor G I.1943.A formulation of Mr.Tuck’s concep-tion of munroe jets.in:Scientific Papers of G.I.Taylor(1963),New York,358-362.
Trehu A M,Bohrmann G,Rack F R,Torres M E,et al.2003.Explanatory notes.in:Proceedings of the OceanDrilling Program,Initial Reports,V.204.
Tsien Hsue-Shen(钱学森).1948.Engineering and engi-neering science.J.Chin.Inst.Eng.,6:1-14.
von Foerster M.1883.Experiments with Compressed GunCotton,Berlin,Germany:Mittler und Sohn.
von Karman T.1911.Festigkeitsversuch unter allseitigemdruck,Zeitshrift des Vereines Deutscher Ingenieure,55:1794-1757.
von Karman T,Duwez P.1950.The propagation of plasticdeformation in solids,J.Appl.Phys.,21:987-994.
Wilkins M L.1964.Calculation of Elastic-Plastic Flow,inMethods in Computational Physics(B.Alder,S.Fern-bach and M.Rotenberg),Academic Press,New York andLondon.
Wood W W.1967.Experimental mechanics at velocityextremes—very high strain rates,Experimental Mechan-ics,7:441-446.
Yang R,Zhang T H,Jiang P,Bai Y L.2008.Experimentalverification and theoretical analysis of the relationshipsbetween hardness,elastic modulus,and the work of in-dentation.Appl.Phys.Lett.,92:231906.
杨卫.1995.宏微观断裂力学.北京:国防工业出版社(Yang W.1995.Macroscopic and Microscopic FractureMechanics.Beijing:National Defense Industrial Press(in Chinese))
伊万诺夫.1988.亚黏土爆破压实.北京:水利水电爆破咨询部(Ivanov.1988.Clayey Soil Compaction byBlasting.Beijing:Consulting Department of Water Re-sources and Hydropower Blasting(in Chinese))
虞吉林,郑哲敏.1984.一种非局部弹塑性连续体模型与裂纹尖端附近的应力分布.力学学报,16:485-494(YU J L,Zheng Z M.1984.A model of nonlocal elastic-plastic continuum applied to the stress distribution neara crack tip.Acta Mechanica Sinica,16:485-494(in Chi-nese))
Zhang X H,Lu X B,Li Q P.2011.Formation of layeredfracture and outburst during gas hydrate dissociation.J.Petro.Eng.Sci.,76:212-216
张登霞,李国豪、周之洪,邵丙璜.1984.材料强度在爆炸焊接界面波形成中的作用.力学学报,16:73-80(Zhang D X,Li G H,Zhou Z H,Shao P H.1984.(Effect of material strength on forming process of explo-sive welding interface wave.Acta Mechanica Sinica,16:73-80(in Chinese))
张建华,张亮,顾道良.1989.爆炸排淤填石法实验研究.第四届全国工程爆破会议报告(Zhang J H,ZhangL,Gu D L.1989.Experimental study on toe-shootingmethod.in:the4th National Engineering Blasting Con-ference(in Chinese))
张旭辉.2010.水合物沉积层因水合物热分解引起的软化和破坏研究.[博士论文],北京:中国科学院力学研究所(Zhang X H.2010.Research on the softeningand damage of hydrate deposit due to the themal de-compositon of hydrates.[PhD thesis].Beijing:Instituteof Mechanics,Chinese Academy of Science(in Chinese))
郑哲敏.1957.关于工程地震的若干问题.力学学报,1:337-349(Zheng Z M.1957.A review on engineering seis-mology.Acta Mechanica Sinica,1:337-349(in Chinese))
郑哲敏.1958a.平板在流体作用下的振动.力学学报,2:11-16(Zheng Z M.1958a.Vibration of panel in thepresence of a fluid.Acta Mechanica Sinica,2:11-16(inChinese))
郑哲敏.1958b.输水管的振动问题.力学学报,2:100-111(Zheng Z M.1958b.Vibration of pipe line.ActaMechanica Sinica,2:100-111(in Chinese))
郑哲敏,马宗魁.1959.悬臂梁在一侧受有液体作用时的自由振动.力学学报,3:111-119(Zheng Z M,Ma Z K.1959.Vibration of cantilever beam placed against waterwith free surface.Acta Mechanica Sinica,3:111-119(inChinese))
郑哲敏,孙同坤,孙国芳.1962.球壳的变形计算和能量准则.[研究报告].北京:中国科学院力学研究所(Zheng Z M,Sun T K,Sun G F.1962.Calculation andenergy criterion of shell deformation.[Research report].Beijing:Institute of Mechanics,Chinese Academy of Sci-ence(in Chinese))
郑哲敏.1962a.爆炸成形模型律.[研究报告].北京:中国科学院力学研究所(Zheng Z M.1962a.Scaling lawof explosion forming.[Research report].Beijing:In-stitute of Mechanics,Chinese Academy of Science(inChinese))
郑哲敏.1962b.水中击波入射平板时空化的形成及其作用.[研究报告].北京:中国科学院力学研究所(Zheng Z M.1962b.Formation and effect of cavitationin shock wave intruding slab under water.[Research re-port].Beijing:Institute of Mechanics,Chinese Academyof Science(in Chinese))
郑哲敏,解伯民.1965.关于地下爆炸计算模型的一个建议.[研究报告].北京:中国科学院力学研究所(Zheng Z M,Xie B M.1965.A suggestion on the cal-culation model of underground explosion.[Research re-port].Beijing:Institute of Mechanics,Chinese Academyof Science(in Chinese))
郑哲敏,解伯民,刘育魁,张德良.1967a.关于地下核爆炸理论计算的一个建议(第2稿).[研究报告].北京:中国科学院力学研究所(Zheng Z M,Xie B M,Liu YK,Zhang D L.1967a.A suggestion on the theoreticalanalysis of underground nuclear explosion(the2th ver-sion).[Research report].Beijing:Institute of Mechanics,Chinese Academy of Science(in Chinese))
郑哲敏,解伯民,刘育魁,张德良.1967b.地下核爆炸力学效应1967年计算小结.[研究报告].北京:中国科学院力学研究所(Zheng Z M,Xie B M,Liu Y K,Zhang D L.1967b.Brief summary of mechanical effectof underground nuclear explosion in1967.[Research re-port].Beijing:Institute of Mechanics,Chinese Academyof Science(in Chinese))
郑哲敏,解伯民,刘育魁,张德良.1969.地下核爆炸的流体弹塑性计算方案和若干结果.[研究报告].北京:中国科学院力学研究所(Zheng Z M,Xie B M,Liu YK,Zhang D L.1969.Hydro-elastoplasticity approach toanalysing underground nuclear explosion and several re-sults.[Research report].Beijing:Institute of Mechanics,Chinese Academy of Science(in Chinese))
郑哲敏.1973a.破甲初步分析及一些基础知识.力学情报,24:36-74(Zheng Z M.1973a.Preliminary analysisand some basic theory on armor penetration.MechanicalIntelligence,24:36-74(in Chinese))
郑哲敏.1973b.破甲初步分析及一些基础知识(续).力学情报,4:67-98(Zheng Z M.1973b.Preliminary anal-ysis and some basic theory on armor penetration(con-tinued).Mechanical Intelligence,4:67-98(in Chinese))
郑哲敏,高举贤,谈庆明,孙庚辰,乔敏,周一以.1974.聚能射流侵彻过程模型律.力学,1:1-10(Zheng Z M,Gao J X Tang Q M,Sun G C,Qiao M,Zhou Y Y.1974.Scaling law in the penetration process of shaped chargejet.Mechanics,1:1-10(in Chinese))
郑哲敏,谈庆明.1977.破甲机理的力学分析与简化模型(631破甲机理课题研究进展报告).科技参考资料,6:108-164(Zheng Z M,Tan Q M.1977.Mechan-ical analysis and simplified model of armor penetrationmechanism(631Research progress report of the armorpenetration project).Science and Technology ReferenceMaterial,6:108-164(in Chinese))
郑哲敏.1980.关于射流侵彻的几个问题,兵工学报,1:13-22(Zheng Z M.1980.Several problems on jet pene-tration.Acta Armamentarii,1:13-22(in Chinese))
郑哲敏.1981.聚能射流的稳定性问题.爆炸与冲击,1:6-17(Zheng Z M.1981.Stability of jet produced byshaped charge.Explosion and Shock Waves,1:6-17(inChinese))
郑哲敏,杨振声.1981.爆炸加工.北京:国防工业出版社(Zheng Z M,Yang Z S.1981.Explosion Processing.Beijing:National Defense Industry Press(in Chinese))
郑哲敏.1982a.从数量级和量纲分析看煤与瓦斯突出的机理.见:力学与生产建设,北京:北京大学出版社,128-137(Zheng Z M.1982a.The mechanisms of coal andgas outburst from the and dimensional analysis.in:Me-chanics and Production Construction.Beijing:BeijingUniversity Press,128-137(in Chinese))
郑哲敏.1982b.连续介质力学与断裂.力学进展,12:133-140(Zheng Z M.1982b.Continuum mechanics andfracture.Advances in Mechanics,12:133-140(in Chi-nese))
郑哲敏,杨振声,金镠.1989.爆炸法处理水下海淤软基.见:郑哲敏文集.北京:科学出版社(Zheng Z M,Yang Z S,Jin L.1989.Dispose soft sea ooze base byblasting.Collected Works of Zhe-Min Zheng.Beijing:Science Press(in Chinese))
郑哲敏,陈力,丁雁生.1993.一维瓦斯突出破碎阵面的恒稳推进.中国科学,23:377-384(Zheng Z M,ChenL,Ding Y S.1993.Steady advancing of fracture front inone-dimensional gas outburst.Science China,23:377-384(in Chinese))
郑哲敏,谈庆明.1996.相似理论与模化.见:《中国机械工程手册》第3篇.北京:机械工业出版社(ZhengZ M,Tan Q M.1996.Similarity theory and model.in:Chinese Mechanical Engineering Handbook,Section3.Beijing:China Machine Press(in Chinese))
郑哲敏.1995.谈谈应用力学.力学与实践,17:1-4.(Zheng Z M.1995.A talk about applied mechanics,Mechanics and Aprctice,17:1-4(in Chinese))
郑哲敏,周恒,张涵信,黄克智,白以龙.1995.21世纪初的力学发展趋势.力学进展,25:433-441(Zheng Z M,Zhou H,Zhang H X,Huang K Z,Bai Y L.1995.Trendsof development in mechanics in the early21st century.Advances in Mechanics,25:433-441(in Chinese))
郑哲敏.2001.学习钱学森先生技术科学思想的体会.力学进展,31:484-488(Zheng Z M.2001.About theideas of H S Tsien on technological sciences.Advancesin Mechanics,31:484-488(in Chinese)
郑哲敏.2004.郑哲敏文集.北京:科学出版社(ZhengZ M.2004.Collected Works of Zhe-Min Zheng.Beijing:Science Press(in Chinese))