土体动剪切模量测定及非线性拟合方法研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
共振柱试验可以测定较小应变(10-6~10-4)范围内土体的动剪切模量,动三轴试验可以测定较大应变(10-4~10-2)范围内土体的动剪切模量。将两种试验方法结合起来共同测定土体的动剪切模量,可提供10-6~10-2应变范围内土体的动剪切模量值,从而可为各类土体的动力分析提供合理的动剪切模量值,可避免以往只用一种试验方法并外推给定整个动应变范围内土体动剪切模量值的不足。文中通过土体动剪切模量的联合测定,研究了不同拟合方法对拟合结果的影响。
Soil dynamic shear modulus in the shear strain range of 10-6~10-4 can be obtained by the resonant column test,and it can be obtained by the cyclic triaxial test in the shear strain range of 10-6~10-2.The dynamic shear modulus in the shear strain range of 10-6~10-2 can be obtained by combining two kinds of test methods,which can give us reasonable dynamic shear modulus in the soil dynamic analysis,which also can improve the shortcomings that we get the modulus by extrapolation based on the limited data.In this paper,combined test method of dynamic shear modulus of soil is provided,and the different fitting results are also studied in it.
引文
[1]张克绪,谢君斐.土动力学[M].北京:地震出版社,1989.
    [2]景立平,李永强,何启智,等.土单元体动力特性试验方法和技术研究技术报告[R].哈尔滨:中国地震局工程力学研究所,2010.
    [3]张占吉,何启智,石兆吉,等.GZ-1型共振柱试验机研制报告[R].哈尔滨:中国科学院工程力学研究所研究报告,1983.
    [4]SL237-1999土工试验规程[S].
    [5]GB/T50269-97地基动力特性测试规范[S].
    [6]Konder R L.Hyperbolic stress strain response:cohesive soils[J].Journal of Soil Mechanics and Foundations,ASCE,1963,89(1):115-143.
    [7]Hardin B O,Drnevich V P.Shear modulus and dampling in soils:design equation and curves[J].Journal of Soil Mechanics and Foundations,ASCE,1972,98(SM7):667-692.
    [8]Martin P P,Seed HB.One dimensional dynamic ground response analysis[J].Journal of Geotechnical Engineering,ASCE,1982,108(7):935-954.
    [9]顾晓鲁,钱鸿缙,刘慧珊,等.地基与基础[M].北京:中国建筑工业出版社,1993.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心