波纹腹板H型钢梁变形性能

英文篇名：Deformation performance of girders with corrugated webs
中文刊名：建筑结构
英文刊名：Building Structure
作者：张哲 ; 李国强 ; 孙飞飞
英文作者：Zhang Zhe~(1 ; 2) ; Li Guoqiang~1 ; Sun Feifei~1(1 State Key Laboratory of Disaster Reduction in Civil Engineering ; Tongji University ; Shanghai 200092 ; China ; 2 School of Civil Engineering ; Zhengzhou University ; Zhengzhou 450001 ; China)
中文关键词：波纹腹板H型钢 ; 刚度 ; 延性系数 ; 剪切
英文关键词：girder with corrugated webs ; stiffness ; ductility factor ; shearing
出版日期：2009-07-25
机构：同济大学土木工程防灾国家重点实验室;郑州大学土木工程学院;
年：2009
期：07
出版单位：建筑结构

摘要

通过分析波纹腹板H型钢梁的弹性受力特点及剪切变形与弯曲变形的比例关系,提出对于此类型钢梁在计算变形时必须考虑剪切的影响,并通过试验和有限元模拟验证了上述结论。随后对各个构件的荷载-位移曲线分析得到了构件的延性系数,证明若设计合理,构件将具有较好的剪切强度和剪切延性,但是当构件为弯曲破坏控制时,构件延性一般。根据上述结论,提出了若干设计建议。
By analyzing the loading characteristic and the proportion relation between shear deflection and bending deflection of girders with corrugated webs under elastic range,it is proposed that the shearing deformation must be taken into account,which is validated by the results of tests and finite element method.Then the ductility factors are got from load-deformation curves of tests,which show the members can possess outstanding shearing strength and ductility,provided the designs are reasonable.But,if the member strength is controlled by bending,the ductility will be general.Based upon the above conclusions,some design proposals are put forward.

引文

[1]张哲,李国强,孙飞飞.波纹腹板H型钢研究综述[J].建筑钢结构进展.2008,10(4):31-36.
    [2]European Committee for Standardization.Eurocode8:Design ofStructures for Earthquake Resistance[S].2003.
    [3]范力,赵斌,吕西林.欧洲规范8与中国抗震设计规范关于抗震设防目标和地震作用的比较[J].结构工程师,2006,22(6):595-63.
    [4]杨媛,白绍良.从各国规范对比看我国抗震设计安全水准评价中的有关问题[J].重庆建筑大学学报(增刊),2000,22(5):192-200.
    [5]ABBAS H H,SAUSE R,DRIVER R G.Behavior of corrugated web I-Girders under in-plane loads[J].Journal of Engineering Mechanics,2006,132(8):806-814.
    [6]朱伯芳.有限单元法原理与应用(第2版)[M].北京:中国水利水电出版社,1998.
    [7]徐绩青.延性系数确定方法的探讨[J].水运工程,2004,368(9):14-17.