焊接过程参数反演分析进展
|
摘要
在阐述了反演分析原理的基础上,介绍了国内外焊接领域,包括材料性能,热源模型,边界条件等问题中反演分析的应用,及反演分析各种算法的原理及特点。指出了焊接过程参数反演分析的前景及可能存在的问题。
Based on the principle of inversion analysis, applications of inversion analysis in welding field including material properties, heat source model, boundary conditions were introduced. Principle and characteristic of inversion analysis algorithms were introduced as well as inversion analysis prospect and problems of welding procedure parameters were also analyzed.
Based on the principle of inversion analysis, applications of inversion analysis in welding field including material properties, heat source model, boundary conditions were introduced. Principle and characteristic of inversion analysis algorithms were introduced as well as inversion analysis prospect and problems of welding procedure parameters were also analyzed.
引文
1 Jurgen Blumm, Jack B Henderson,Ludwig Hagemann. Measurement of the thermophysical properties of an aluminum - silicon casting alloy in the solid and molten regions. High Temperature - High Pressure, 1998, 30:153-157
2 Libor Vozar. Measurement of the thermal diffusivity by the laser -flash method with repeated pulses. High Temperature - High Pressure, 2001, 33:9-16
3 Wolfgang Hohenauer. An estimation of thermophysical properties of layered materials by the laser - flash method. High Temperature -High Pressure, 2001, 33:17 - 25
4熊盛武,李元香．演化参数反演方法．武汉大学学报(理学 版),2001,47(1):37—41
5熊先仁,杨菊梅．洪门水电站土石坝反馈分析．江西科学, 1996(3):129—134
6吉林,赵启林,冯兆祥,等．岩土工程中反分析的研究进 展．水利水运工程学报,2002(4):57～63
7杨文采．非线性地球物理反演方法:回顾与展望．地球物理 学进展,2002(2):255—261
8 De A, Debroy T. Probing unknown welding parameters from convec-tive heat transfer calculation and multivariable optimization. Journal of Physics D: Applied Physics, 2004, 37(1): 140- 150
9 Binda B, Capello E, Previtali B. Semi - empirical model of the temperature field in the AISI 304 laser welding. Journal of Materials Processing Technology, 2004, 155 - 156: 1 235 - 1 241
10 Zhu X K, Chao Y J. Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel. Journal of Materials Processing Technology, 2004, 146(2): 263 ~ 272
11 Lambrakos S C, Fonda R W, Milewski J O, et al. Analysis of friction stir welds using the inverse - problem approach. ASM Proceedings of the International Conference: Trends in Welding Research, 2002: 153-157
12 Keanini R C, Desai N N. Inverse finite element reduced mesh method for predicting multi - dimensional phase change boundaries and nonlinear solid phase heat transfer. International Journal of Heat and Mass Transfer, 1996,39(5): 1 039- 1 049
13陶军．TIG焊接过程中LY2铝合金热学和力学参数的反 演:[学位论文]．哈尔滨:哈尔滨工业大学,2005．
14 Li D Q, Tao J, Meng Q C, et al. Indirect measurement of material thermal and mechanical properties during welding. Journal of Materials Science & Technology, 2003, 19(Sup. 1): 173 - 175
15王登刚,刘迎曦,李守巨．弹性力学非线性反演方法概述． 力学进展,2003．33(2):166—174
16王文萍．利用遗传算法和最小二乘联合反演共和地震位错 参数．地震学,1999(3):285～290
17陈尚法．基于人工神经网络的岩石高边坡稳定反馈分析研 究．中国农村水利水电,2001,S1:84—86
18刁心宏．人工神经网络方法辨识岩体力学参数的可辨识性 及其稳定性探讨．矿冶,2001(3):11～19
19张文钺．焊接传热学．北京:机械工业出版社,1989:152—168
20 Li Dongqing, Zhang Zhongdian, Li Dan, et al. System design of welding dynamic displacement measurement using laser ESPI. China Welding, 2001, 10(1): 64-69
2 Libor Vozar. Measurement of the thermal diffusivity by the laser -flash method with repeated pulses. High Temperature - High Pressure, 2001, 33:9-16
3 Wolfgang Hohenauer. An estimation of thermophysical properties of layered materials by the laser - flash method. High Temperature -High Pressure, 2001, 33:17 - 25
4熊盛武,李元香．演化参数反演方法．武汉大学学报(理学 版),2001,47(1):37—41
5熊先仁,杨菊梅．洪门水电站土石坝反馈分析．江西科学, 1996(3):129—134
6吉林,赵启林,冯兆祥,等．岩土工程中反分析的研究进 展．水利水运工程学报,2002(4):57～63
7杨文采．非线性地球物理反演方法:回顾与展望．地球物理 学进展,2002(2):255—261
8 De A, Debroy T. Probing unknown welding parameters from convec-tive heat transfer calculation and multivariable optimization. Journal of Physics D: Applied Physics, 2004, 37(1): 140- 150
9 Binda B, Capello E, Previtali B. Semi - empirical model of the temperature field in the AISI 304 laser welding. Journal of Materials Processing Technology, 2004, 155 - 156: 1 235 - 1 241
10 Zhu X K, Chao Y J. Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel. Journal of Materials Processing Technology, 2004, 146(2): 263 ~ 272
11 Lambrakos S C, Fonda R W, Milewski J O, et al. Analysis of friction stir welds using the inverse - problem approach. ASM Proceedings of the International Conference: Trends in Welding Research, 2002: 153-157
12 Keanini R C, Desai N N. Inverse finite element reduced mesh method for predicting multi - dimensional phase change boundaries and nonlinear solid phase heat transfer. International Journal of Heat and Mass Transfer, 1996,39(5): 1 039- 1 049
13陶军．TIG焊接过程中LY2铝合金热学和力学参数的反 演:[学位论文]．哈尔滨:哈尔滨工业大学,2005．
14 Li D Q, Tao J, Meng Q C, et al. Indirect measurement of material thermal and mechanical properties during welding. Journal of Materials Science & Technology, 2003, 19(Sup. 1): 173 - 175
15王登刚,刘迎曦,李守巨．弹性力学非线性反演方法概述． 力学进展,2003．33(2):166—174
16王文萍．利用遗传算法和最小二乘联合反演共和地震位错 参数．地震学,1999(3):285～290
17陈尚法．基于人工神经网络的岩石高边坡稳定反馈分析研 究．中国农村水利水电,2001,S1:84—86
18刁心宏．人工神经网络方法辨识岩体力学参数的可辨识性 及其稳定性探讨．矿冶,2001(3):11～19
19张文钺．焊接传热学．北京:机械工业出版社,1989:152—168
20 Li Dongqing, Zhang Zhongdian, Li Dan, et al. System design of welding dynamic displacement measurement using laser ESPI. China Welding, 2001, 10(1): 64-69
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心