基于小波变换的矿山微震信号滤波方法研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
基于小波变换的多尺度分析思想,针对矿山微震信号具有频带较宽、谱成分丰富的特性,提出了对不同频率范围的信号和噪声进行滤波处理的方法。利用该方法可将噪声与信号分离以及将不同频段信号分解,从而达到滤波的目的。实验结果表明,该小波变换方法能够有效去除微震异常信号的噪声,可应用于微震信号的预处理。
According to wide frequency band and rich frequency spectrum of mine's slight shock signal,the filtration method based on wavelet-transform is introduced to treat signal and noise in different frequency ranges.Under application of the filtration method,noise can be separated from signal and signals of different frequency band can be decomposed thus the goal of wave filtration is achieved.Test results show the method is able to remove noise effectively from slight shock signal thus can be used to pre-treat slight shock signal.
引文
[1]潘一山.矿震的发生和破坏规律研究.[博士后出站报告][R].北京:中国地震局地质研究所,2003-01.
    [2]刘明才.小波分析极其应用[M].北京:清华大学出版社,2005.
    [3]潘泉等.小波滤波方法及应用[M].北京:清华大学出版社,2005.
    [4]孔祥茜,吴继伟,岳继光.地震信号小波变换的去噪方法[J].《计算机辅助工程》,2005(3):14.
    [5]陆菜平等.岩体微震监测的频谱分析与信号识别[J].《岩土工程学报》,2005(3):18~26.
    [6]董长虹.Matlab小波分析工具箱原理与应用[M].北京:国防工业出版社,2004.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心